Colour Television Instructions Manual

ENGLISH - 10 -
 Select "Fine tuning" item. Then press   or   button to
fine -tune the channel.
Name:
You can store the channel name or change it.
 Select Name item. Then press 
 or   button to display
a cursor.
 Press 
 or   button to select a character and
press 
 or   button to move the cursor.
 After the name is completed, press the MENU button.
Mode:
Set "Mode" item to "TV" for the TV channels.
 When you watch a picture from your VCR and the picture is
unstable, you may improve it by changing the "Mode" set-
ting from "TV" to "VCR".
Decoder (EXT-2):
You can only set Decoder (EXT-2) item to ON if you have
a decoder connected to a T-V LINK compatible VCR, which
in turn is connected to the EXT-2 terminal. To use this item,
please see the
Using the Decoder (EXT-2) function on the following sec-
tion.
Store:
After the all settings are completed, store the new channels
setting to the programme number which you selected.
 Press   or   button to select Store, then press

 or   to store it.
Using the Decoder (EXT-2) function
If you have a decoder connected to a T-V LINK compatible
VCR, which in turn is connected to the EXT-2 terminal, use
DECODER (EXT-2) to unscramble the scrambled TV chan-
nels.
1. Exit the menu.
2. Turn on the decoder power.
3. Display the scrambled TV channel on the TV. Even if the
decoder is working, a scrambled picture appears.
4. Display the INSTALL. menu again.
5. Press 
 or   button to select DECODER (EXT-2),
then press 
 or   button to set to ON
6. Press   or   to select STORE, then press   or

 button to store it. T-V LINK menu will appear after the
TV stores the setting.
7. Follow the operating procedure Downloading the data
to VCR on page 6 to transmit the revised programme
table data to the VCR.
 If you do not want to transmit, press STANDARD but-
ton to exit the menu.
Note:
You can only use this item if you have a decoder connected
to a T-V LINK compatible VCR to EXT-2 terminal. Setting this
item to ON by mistake causes the picture/sound of a TV
channel you are currently viewing to disappear.
If this item has been set to ON but the TV channel cannot
be unscrambled, check the following:
 Has the decoder been connected to the VCR properly ac-
cording to the VCR and Decoder instruction manuals?
 Can the TV channel be unscrambled with a decoder?
 Do you need to change the VCR settings in order to con-
nect the decoder? Confirm that the VCR is set properly by
rechecking the VCR instruction manual.
Program Menu:
You can use the PROGRAM menu to change a programme
number, delete a channel.
 Press 
 or   button to select PROGRAM item.
 Press 
 or   button to enter the PROGRAM menu.
To choose a channel in the PROGRAM menu:
Press 
 /  /   /   button.
The colour of the programme number that you choose is
changed in the PROGRAM menu and you can view the pic-
ture of that channel.
Caution:
Using DELETE or CHANGE item rewrite the current chan-
nel list in the PROGRAM menu. Therefore, the programme
numbers of some of channels will change.
When you complete the settings of PROGRAM menu:
If you have a T-V LINK compatible VCR, press the 
 but-
ton to display the T-V LINK menu. Then follow the operating
procedure Downloading the data to VCR on page 6 to
transmit the Programme table data to the VCR.
01-ENG-2834-AK52-1100UK-4-3-(AV-28RH4BU&SU).p65 27.04.2004, 10:4710