Colour Television Instructions Manual

ENGLISH - 9 -
 Press   or   button to select the country where
you are now located.
 After selecting the country, press 
 or   button to store
the selected country.
 Press MENU button to return to the INSTALL menu, or
Press STANDARD button to exit the menu.
Tuning Menu:
You can store a channel manually, or modify the current set-
tings of a channel (for example, changing the channel name).
In an AV mode, you can change only the MODE or CO-
LOUR SYSTEM setting.
 If you want to modify the current settings of a channel, se-
lect the channel of which you want to modify the setting.
Then display the main menu on the screen.
 Press   or   button to select TUNING item.
 Press 
 or   button to enter TUNING menu.
1. Press   or   to select an item in the TUNING
menu. Then press 
 or   button to change the setting.
2. After all settings of a channel are completed, press 

or 
 button to select Programme item. Then press

 or   button to select a programme number which you
want to store the setting.
3. Press   or   button to select Store item. Then
press 
 or   button to store the setting.
The "STORED" appears at the bottom of the menu for 3
seconds. Then T-V LINK menu appears.
4. If you do not have a T-V LINK compatible VCR, press
STANDARD button to exit the menu.
If you have a T-V LINK compatible VCR connected to the
EXT-2 terminal, follow the operating procedure Down-
loading the data to VCR on page 6 to transmit the Pro-
gramme table data to the VCR.
Search:
You can search a channel manually.
 Select "Search" item. Then press 
 or   button to start
searching. "SEARCHING" is displayed while the TV is
searching a channel.
 Searching stops when the TV finds a channel. Then the
channel is displayed.
 Press 
 or   button repeatedly until the channel you want
appears.
 When you cannot search a channel you want, select the
"Standard" item and select other broadcasting system.
Then start searching again.
Standard:
 If you cannot hear the normal sound even when the picture
appears normally, select the correct broadcasting system to
hear the sound normally.
 Select "Standard" item. Then press 
 or   button to se-
lect a broadcasting system.
Colour system:
 If the picture is not clear or no colour appears, select the
correct colour system to display the picture normally.
 Select "Colour system" item. Then press 
 or   button
to select a colour system.
Band, Channel:
 If you know a channel number, you can find it directly by
entering the channel number.
 Select the "Band" item. Then press 
 or   button to se-
lect the band (C or S) where the channel you want is lo-
cated.
 Select the Channel item. Then press   or   button to
select the channel number, or enter the channel number
with the digit buttons. The available channel numbers differ
depending on your COUNTRY and Standard settings.
Fine tuning:
If the channel reception is poor, fine-tune the channel.
01-ENG-2834-AK52-1100UK-4-3-(AV-28RH4BU&SU).p65 27.04.2004, 10:479