DVD/HDD Video Recorder & Video Cassette Recorder Instructions Manual

Masterpage:Right+
EN 87
Filename [MX1SEU_13Subsidiary.fm]
SUBSIDIARY SETTINGS
Page 87Monday, 6 December 2004 14:01
Some DVD-RAM/RW discs are unformatted.
Format the disc when you use an unformatted disc or you want to
delete all recordings and data on the disc.
Format A DVD-RAM Disc
1 Press HDD or DVD so that the HDD or DVD lamp lights up on
the unit.
2 Press SET UP to access the Main Menu screen.
3 Press DE to select AHDD/DVD SET UPB, then press G.
4 Press DE to select ADISC SET
UPB, then press G.
5 Press FGD E to select
AFORMATB, then press
ENTER. Press DE to select
AOKB, then press ENTER.
6 Press DE to select
AEXECUTEB, then press
ENTER.
Format A DVD-RW Disc
1 Perform steps 1 to 4 of AFormat A DVD-RAM DiscB as above
before continuing.
2 Press FGD E to select AFORMATB , then press ENTER. Press
DE to choose AVR MODEB or AVIDEO MODEB, then press
ENTER when ADISC WILL BE FORMATTEDB appears on the
TV screen.
AVR MODEB:
To be chosen when you want to record, erase, or edit data on
the disc repeatedly.
AVIDEO MODEB:
To be chosen when you want to erase all the data on the disc
once played back to record new data, or play back the disc on
other DVD players.
3 Press DE to select AEXECUTEB, then press ENTER.
NOTES:
● It is impossible to format Version 1.0 DVD-RW discs in Video
mode.
● It is impossible to format DVD-R discs.
● All the titles on a disc will be deleted once the disc is formatted
even if they are protected titles. (A pg. 59)
Format A Disc (DVD Deck Only)
ATTENTION:
● When a disc is formatted, all recordings and data are erased. It
is impossible to restore them.
● Never turn off the unit or disconnect the mains power cord
while ANOW FORMATTING...B is displayed on the TV screen.
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/SAT/DVD switch to DVD.
● Load a DVD-RAM/RW disc to format.
rtwe
ENTER
SET UP
CABLE/SAT
DVDTV
Video
Vide o
ENTER
SELECT
SET UP
EXIT
DVD VIDEO SET UP
FINALISE
CANC. FINALIS.
HDD/DVD SET UP
FUNCTION SET UP
INITIAL SET UP
HDD SET UP
DVD SET UP
DISC SET UP
FORMAT
SELECT WITH @ THEN PRESS [ENTER]
PRESS [SET UP] TO EXIT
MX1SEU_00.book Page 87 Monday, December 6, 2004 2:01 PM