Plasma Display Users Guide

24
Quick Setup Connections
This TV can be used as a computer screen. Use a commercially available D-SUB cable to
connect the TV's PC INPUT terminal to the computer's analog RGB output terminal. If you
want to listen to the sound from the computer, use a commercially available RCA cable to
connect the INPUT-4 audio input terminal to the computer's audio output terminal. When the
sound from the computer is mono, connect to the L/MONO of INPUT-4.
Connecting to the computer
L/MONO-AUDIO-R
S-VIDEO VIDEO
CHANNELVOLUME POWER
OPERATE
MENU
INPUT
PC INPUT
INPUT-4
POWER
OVER
Notes:
• Refer to your computer manual for a detailed
explanation of the connections concerning your
computer.
• Make sure that the connectors are facing the
correct way when connecting.
• After connecting, tighten the two screws to fix
the connectors in place.
Looking at the images from a computer
After starting the computer, press the INPUT button to choose INPUT-4. You can listen to the
sound when the sound from the computer is connected to the INPUT-4 AUDIO input terminal.
Notes:
• When the sound from the computer is connected to INPUT-4 by choosing external input
INPUT-4, the sound from the computer can be listened to, but the images from the computer
cannot be seen.
PD-42X776 Eng1 24 3/24/05, 9:35:07 AM