D-ILA Projector Instruction Manual

22
Connection and Installation
Connection During Two-Screen/
Four-Screen Mode Display
The two-screen/four-screen mode enables simultaneous display of signals from two or four computers.
To select the two-screen mode, set ADisplay ModeB in the Setting menu to ADoubleB. To select the four-screen mode, set
ADisplay ModeB to ACrossB. (A Page 38)
 Possible Input Signals and Projected Image
NOTE:
● This projector converts the frame rate to 60 Hz regardless of the synchronizing signal frequency at the computer’s end.
● The respective signals are displayed at the center of the split screen.
● When in the two-screen mode, the screen appears blue (or black depending on the setting) when there is no input.
Connecting Video
Signals of the Computer
(Cont’d)
Computer 1, Computer 2
Output Status
Resolution Channel Link Status
20481200 1ch Single Normal 20481200
20481080 1ch Single Normal 20481080
19201200 1ch Single Normal 19201200
19201080 1ch Single Normal 19201080
16001200 1ch Single Normal 16001200
12801024 1ch Single Normal 12801024
1024768 1ch Single Normal 1024768
800600 1ch Single Normal 800600
640480 1ch Single Normal 640480
4096
DVI 1 DVI 3
2400
2048
4096
DVI 1
DVI 3
DVI 2
DVI 4
2400
1200
2048
Two-Screen Mode
(Example) DVI 1: 19201080,
DVI 3: 19201080
Four-Screen Mode
(Example) DVI 1: 20481200, DVI 2: 19201080,
DVI3:1024768, DVI 4: 16001200