Color Television Users Guide
Initial Setup
24
Auto Tuner Setup
The auto tuner setup function is described on page 17 as the interactive plug-in menu. If you
need to run the auto tuner setup again, follow the steps below.
Press the MENU button
π†
To AUTO TUNER SETUP
è
To operate
è
To choose CABLE or AIR
†
To move to START
è
To start Auto Tuner Setup
Programming will take approximately 1 to 2 minutes. The
auto tuner is finished when the message PROGRAMMING OVER! appears onscreen.
Channel Summary
Channel summary allows you to customize the line-up of channels received by your TV. You can
add or delete channels from the line-up or prevent any unauthorized viewers from watching any
or all 181 channels.
Press the MENU button
π†
To CHANNEL SUMMARY
è
To operate
The Channel summary screen will now be displayed with
the channels set to scan marked with an “√”. You can
delete channels from the scan by removing the “√”. If any
channels were missed during auto tuner setup and you
wish to add them, you may by placing an “√” next to the
channel number.
π†
To the SCAN column
è
To include or delete from scan
π†
To the ID column
è
To add channel label
è
To insert letter
†
To next letter
†
To move to FINISH when label is complete
è
To memorize the label
Press the EXIT button when finished
You can block access to a channel by activating the channel lock.
Press the MENU button
π†
To CHANNEL SUMMARY
è
To operate
π†
To the Lock Column ( )
Press the ZERO button to lock or unlock that channel
Press the EXIT button when finished
27\32\36F475\485 English 1/27/04, 11:23 AM24