Instruction Manual

13
English |
Setup
Continued on the next page...
Setup
Settings
1 Press and hold < > to display the settings.
2 Press <E>/<F> to select the category.
3 Turn the volume knob to select an item (see the
following table), then press the knob.
4 Repeat step 3 until the desired item is selected/
activated or follow the instructions stated on
the selected item.
5 Press < >.
Audio Settings
Fader F12 — R12 (F0/R0): Adjusts the front
and rear speaker output balance.
Balance L12 — R12 (L0/R0): Adjusts the left and
right speaker output balance.
Graphic
Equalizer
Selects a preset equalizer suitable to the
music genre.
Flat / Hard Rock / Classical / Pop / Dance
/ DRVN / Hip Hop / User
Select [User] to use the settings made
1) Press the volume knob to select the
frequency.
2) Turn the volume knob to adjust the
level.
3) Press <
>.
Loudness Sets the amounts of boost of low and
high tones.
“ON”, “OFF” (Default)
X’over You can set the crossover frequency of
speakers.
1) Press <E>/<F> to select the
speaker.
2) Press the volume knob to select the
item.
3) Turn the volume knob to adjust the
value.
4) Press <
>.
General Settings
(P.3)
Bluetooth Settings
Discoverable Enable (Default)/Disable: Activates
or deactivates the Bluetooth
functions.
Device Name The Bluetooth device name of this
unit is displayed.
B5A-3196-30_KD-MR1BTS_K.indb 13 2019/04/02 17:22