Instruction Manual Automatic Feeder A B C <–––> D E www.juwel-aquarium.
Introduction Thank you for choosing a JUWEL Aquarium product. Our products represent over 40 years experience in the manufacturing of aquariums and their accessories applying the most modern production techniques in bringing together the JUWEL Aquarium system, which is both easy to use and simple to maintain. Installing the JUWEL Automatic Feeder The JUWEL automatic feeder is suitable for all aquariums.
Programming the JUWEL Automatic Feeder The JUWEL automatic feeder enables you to program up to two feeds per day. When setting up the feeder please consider the timing carefully, the first feed will happen when you turn the feeder on and then subsequently every 24 hours at that set time. If you select a second feed this will happen automatically 6 hours after the first and again will repeat this cycle every 24 hours. Please consider this timing to avoid feeding the fish when the lights are out.
Installing the JUWEL Automatic Feeder 1. Pull container C to the outside 2. Remove cover A and insert feed. The feed should not be compressed in order to ensure its even release. 3. Close the container with cover A and re-insert the container in such a manner that it audibly clicks into position. 4. As detailed in "Installation", please place the automatic feeder above the opening of the feeder hole. It is possible to connect the JUWEL automatic feeder to an air pump in order to keep the food dry.
Guarantee We guarantee the performance of the JUWEL-Aquarium product or its accessories to the purchaser for a period of 24 months from the date of purchase according to the following conditions: § 1 Extent of the guarantee (1) This guarantee extends to the JUWEL-Aquarium product and its components excluding items subject to wear and tear such as light tubes and filter media. It is limited to the product as such and does not cover damage to other property and/or individuals.
