smart wristband user's Guide Component introduction *Host *Wrist strap *Packing box *manual *Charging cable
Charge the bracelet Use it for the first time to ensure that the battery is in normal condition. If the power is not turned on normally, please connect the charger to charge the device. Install the bracelet app on your phone System requirements: Android 5.0 and above; iOS9.0 and above; support for Bluetooth 4.0.
Device connection For the first use, you need to connect the APP for calibration. After the connection is successful, the bracelet will automatically synchronize the time. Turn on the Bluetooth switch of the mobile phone system → enter the app device module settings → click “Bind device, experience more features” to enter, find and connect the bracelet device. Android phones need to allow apps to run in the background.
Wear it properly The bracelet is best worn after the ulnar styloid Adjust the size of the wrist according to the adjustment hole; buckle the wrist strap buckle. The sensor should be close to the skin to avoid moving. Bracelet function description Long press the home button to switch on/off the device. On standby,long press the touch screen 2 seconds switch theme. Slide down: Display message content. Slide up: Enter menu page. Slide left and right from the homepage to goto step count,Health & app QR code.
Step Number of steps Record the number of daily movement steps to view the current real-time steps. Distance The distance of motion is estimated based on the number of walking steps. Calories Estimate the calories burned based on the number of walking steps Health Entering the Health, the current heart rate, blood pressure, and blood oxygen test results are displayed. This feature requires a wristband to support heart rate and blood pressure sensors.
Ping-pong The calories and duration of Ping-pong consumption can be recorded under this interface. Basketball The calories and duration of Basketball consumption can be recorded under this interface. Badminton The calories and duration of Badminton consumption can be recorded under this interface. Climbing The calories and duration of Climbing consumption can be recorded under this interface. Cycling The calories and duration of Cycling consumption can be recorded under this interface.
Find In the connected state, click the “Find” option and the phone will vibrate and alarm. Remote photography In the connected state, start the photo from the wristband or the APP to enter the remote camera interface, shake/turn the wrist/touch the bracelet, and automatically take a photo after 3 seconds of counting down. Please allow the APP to access the photo album to save the self-portrait photo.
the last three message records). (You need to give the APP permission to get system notifications, and the wristband can display 20-40 words). APP function and settings Sleep mode When you fall asleep, the bracelet will automatically enter the sleep monitoring mode and will automatically detect your sleep pattern (deep sleep / shallow sleep / wake up) all night to accurately calculate your sleep quality. Note: Please note the following description for the Sleep monitoring: 1.
immediately after waking up, as this may cause a misjudgement of your sleep status. C. Sleep will not be recorded, if you fall asleep before 22:00 PM or after 06:00 AM. The time of getting up is independent of this. Alarm setting In the connected state, 8 alarms can be set. After setting, it will be synchronized to the bracelet; offline alarm is supported. After the synchronization is successful, even if the APP is not connected, the bracelet will be reminded according to the set time.
Remove device This feature will erase data and remove device Looking for a bracelet In the connected state, click the “Find” option and the bracelet will vibrate. Other functions: Turn on the vibration setting function, when there are calls, messages or other reminders, the bracelet will vibrate. If it is off, the bracelet will only have a screen reminder without shaking to avoid interruption.
Basic parameters Equipment type smart wristband type of battery Lithium polymer Vibration motor stand by Synchronously Bluetooth 4.0 Operating temperature -10°C~50°C sensor System Requirements IOS9 or above / Android5.0 or above Low power acceleration sensor Precautions 1. Bathing and swimming should not be worn. 2. Please connect the bracelet when synchronizing data. 3. Use the included charging cable to charge. 4.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
