Securebook 5.0 MANUAL FCC ID: 2AS4KJTS-SB50W Model Name: JTS-SB50W Securebook 5.0 is made of ABS semi-transparent material, and we can see the internal structure of the machine through the outer casing. It supports a variety of systems such as Windows, Ubuntu, endless, and multiple languages to meet the needs of different users.
Securebook 5.0 uses the Intel Apollo Lake series chip (N3350/N3450/N4200) and uses 2.5'’SSD/HDD storage. It has ultra-low power consumption and good performance, and can support 8 hours of long-term operation. It has a fingerprint function, operating temperature range is 0 °C -40 °C, and the weight is 1180g.
How to power on Press the power key 3~5 seconds, and then the power LED (white) is on, the LCD will light up. Wait about 5~10 seconds, it will enter the system. How to charging Plug the power adaptor into the DC Jack, and then the power LED(red) is on, and the battery icon in the system shows the charging status. PS: When the system prompts “The battery is lower than 10%” or “The battery is low”, please charge the laptop in time, otherwise the laptop will automatically shut down.
The function key on the keyboard Open the search interface To reduce LCD lightness To increase LCD lightness Use HDMI to switch to the laptop or outer display Enter to sleep mode Set to silent mode Reduce the speaker volume Increase the speaker volume When video playing, to back When video playing, to switch Play /Pause When video playing, to fast Convert to numeric keypad
DISCLAIMER OF WARRANTY The guarantee does not apply in case of accidental physical damage, and it does not cover such damage and failures that resulted: •improper installation (of a bad installation) or a misuse or poor maintenance of the product. •improper use of the material or not complying with the instructions in the user manual.
FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
