Technical data

5 Maintenance

k T Press the Rotary Switch.

‘Machine is being cleaned.’, water flows repeatedly out of

the coffee spout and the cappuccino frother.

The operation is interrupted,

‘Empty coffee grounds con-

tainer’

T Empty the drip tray and coffee grounds container and put

them back into the machine.

Cleaning is now complete. The IMPRESSA is once more

ready for use.

The IMPRESSA builds up deposits of limescale over time and auto-

matically prompts you to descale it when necessary. The degree of

calcification depends on the hardness of your water.

If the descaling agent comes into contact with the skin or eyes, this

can cause irritation.

T Avoid contact with the skin or eyes.

T Rinse off descaling agent with clean water. Should you get any

descaling agent in your eye, see a doctor.

If the wrong descaling agent is used, the machine could be dam-

aged and/or traces could be left behind in the water.

T Use only original JURA maintenance products.

If the descaling operation is interrupted, there may be damage to

the machine.

T Allow the descaling programme to run to the end.

If the descaling agent comes into contact with sensitive surfaces

(e.g. marble), damage cannot be ruled out.

T Clean up any splashes immediately.

E The descaling programme lasts approximately 45 minutes.

E JURA descaling tablets are available from stockists.

E If you use a CLARIS Blue filter cartridge and this is activated,

you will not be prompted to descale.

Descaling the machine

CAUTION