Technical data

34
5 Maintenance
T Empty the other receptacle and place it under the cappuc-
cino frother again.
c T Press the Maintenance button.
T Press the
‘Next’ button.
‘Milk system is being cleaned.’, the cappuccino frother and
the pipe are rinsed with fresh water.
‘Please select product:’ appears on the display.
T Carefully pull the cappuccino frother down and off.
T Dismantle the cappuccino frother into its individual parts.
T Rinse all parts of the cappuccino frother thoroughly under
running water.
T Reassemble the cappuccino frother.
E Ensure that all individual parts are correctly and firmly con-
nected to ensure correct operation of the cappuccino frother.
T Firmly attach it to the connector.
E After 50 litres of water have flowed through, the filter will
cease to work. Your IMPRESSA will automatically prompt you
to change the filter.
E After two months, the filter will cease to work. You can check
the elapsed time by referring to the date plate on the filter
holder in the water tank.
E If the CLARIS Blue filter cartridge is not activated in program-
ming mode, you will not be prompted to change the filter.
Precondition:
‘Change filter’ is displayed.
O T Press the P button.
‘Maintenance status (1/6)’
T Press the ‘Change the filter’ button.
‘Change the filter’
E If you do not want to start changing the filter just yet, press
the
‘’ button. The prompt ‘Change filter’ remains active.
Dismantling and rinsing
the cappuccino frother
Changing the filter