Technical data

24
4 Permanent settings in programming mode
In the programme item ‘Product settings (2/6)’ you can make indi-
vidual settings for all speciality coffees and hot water. The following
settings can be made:
Product Temperature Coffee strength Amount
Ristretto,
espresso,
coffee
‘Normal’, ‘High’
‘extra-mild ;’, ‘mild ;;’,
‘normal ;;;’
, ‘strong ;;;;’,
‘extra-strong ;;;;;’
Volume: ‘25 ml’ – ‘240 ml’
Two ristretti,
two espressi,
two coffees
‘Normal’, ‘High’ – Volume: ‘25 ml’ – ‘240 ml’
(per cup)
Latte macchiato,
cappuccino
‘Normal’, ‘High’
‘extra-mild ;’, ‘mild ;;’,
‘normal ;;;’
, ‘strong ;;;;’,
‘extra-strong ;;;;;’
Amount of milk:
‘3 sec.’ – ‘120 sec.’
Interval: ‘0 sec.’ – ‘60 sec.’
Volume: ‘25 ml’ – ‘240 ml’
Milk portion – – ‘3 sec.’ – ‘120 sec.’
Hot water ‘Low’, ‘Normal’,
‘X high’
– ‘25 ml’ – ‘450 ml’
Example: Proceed as follows to change the amount of milk for a
latte macchiato from
‘16 sec.’ to ‘20 sec.’, the interval from ‘30 sec.’
to
‘40 sec.’ and the amount of water from ‘45 ml’ to ‘40 ml’.
Precondition:
‘Please select product:’ is displayed.
O T Press the P button.
‘Maintenance status (1/6)’
g T Turn the Rotary Switch until the programme item ‘Product
settings (2/6)’
is displayed.
T Press the
‘Expert mode’ button.
‘Expert mode’
E Next select the button of the product for which you would like
to make settings. No product is prepared at this point.
T Press the
‘Latte macchiato’ button.
‘Latte macchiato’
T Press the ‘Amount of milk’ button.
T Press the
‘ < ’ or ‘ > ’ button to change setting for the amount
of milk to
‘20 sec.’.
Product settings