Technical data

21
3 Daily operation
3 Daily operation
When the IMPRESSA is switched on, it automatically prompts you
to perform the rinse operation. Start the rinse operation by pressing
the Rotary Switch k. In programming mode you can change this
setting so that the machine starts the switch-on rinse automatically.
Precondition: Your IMPRESSA is switched on at the power switch.
T Place a receptacle under the coffee spout.
Q T Press the On/Off button to switch the IMPRESSA on.
‘Welcome to JURA’ appears on the display. The machine
heats up.
‘Please press the Rotary Switch.’
k T Press the Rotary Switch.
The machine rinses. The operation stops automatically and
‘Please select product:’ appears on the display.
To ensure that you get many years of reliable service out of your
IMPRESSA and to guarantee the optimum coffee quality, the
machine requires daily maintenance.
T Pull out the drip tray.
T Empty the coffee grounds container and the drip tray. Rinse
them both with warm water.
T Dry the metal contacts on the back of the drip tray.
T Refit the coffee grounds container and the drip tray.
T Rinse the water tank with clean water.
T Dismantle and rinse the cappuccino frother (see Chapter 5
‘Maintenance – Rinsing the cappuccino frother’).
T Wipe the surface of the machine with a clean, soft, damp
cloth (e.g. microfibre cloth).
Switching on
Daily maintenance