Technical data

2 Preparation

Your IMPRESSA can prepare a latte macchiato or cappuccino at the

touch of a button. There is no need to move the glass or cup.

Example: Proceed as follows to prepare one latte macchiato.

T Remove the protective cover from the cappuccino frother.

T Attach the milk pipe to the cappuccino frother. Use the long

pipe for a milk carton and the short pipe for a milk container.

T Insert the other end of the milk pipe into a milk carton or

connect it to a milk container.

T Place a glass under the cappuccino frother.

T Turn the setting wheel of the cappuccino frother to the Milk

Foam position ü.

T Press the

‘Latte macchiato’ button.

‘Latte macchiato’, the milk foam is prepared.

Preparation stops automatically when the preset amount of

milk is reached.

E There is a short interval while the hot milk separates from the

milk foam. This allows the typical layers of a latte macchiato

to form. You can choose the length of this interval in program-

ming mode (see Chapter 4 ‘Permanent settings in program-

ming mode – Product settings’).

Coffee preparation starts. The preset amount of water flows

into the glass. Preparation stops automatically and

‘Please

select product:’

appears on the display.

To make sure the cappuccino frother always works properly, rinse

and clean it regularly (see Chapter 5 ‘Maintenance – Rinsing the cap-

puccino frother’).

Latte macchiato,

cappuccino