Technical data

31
4 Permanent settings in programming mode
In the programme item ‘Machine settings’ (‘4/7’) / ‘Factory setting’
the machine can be reset to its factory setting: All user settings
(apart from the ‘filter’ and ‘water hardness’) are reset to factory set-
tings. Your JURA F9 then switches off.
Precondition:‘Please select product’ is displayed.
 O T Press the P button.
‘Maintenance status’ (‘1/7’)
 g T Turn the Rotary Switch until ‘Machine settings’ (‘4/7’) is dis-
played.
T Press the ‘Factory setting’ button.
‘Factory setting’ / ‘Reset the machine to the factory set-
tings?’
T Press the ‘Yes’ button.
‘Saved’ appears briefly on the display.
Your JURA F9 is switched off.
In this programme item you can set the language used by your
JURA F9.
Example:Proceed as follows to change the language from ‘English’
to ‘Deutsch’.
Precondition:‘Please select product’ is displayed.
 O T Press the P button.
‘Maintenance status’ (‘1/7’)
 g T Turn the Rotary Switch until ‘Machine settings’ (‘4/7’) is dis-
played.
T Press the ‘Choose language’ button.
‘Choose language’
E To display more languages, press the ‘>’ button (bottom
right).
T Press the ‘Deutsch’ button.
‘Gespeichert’ appears briefly on the display.
‘Geräteeinstellungen’
 O T Press the P button to exit programming mode.
‘Bitte wählen’
Restore factory settings
Language