Technical data

27
4 Permanent settings in programming mode
T Press the ‘Product name’ button.
The available letters, numbers and special characters appear
on the display.
E By pressing the ‘abc/ABC’ button, you can switch between
lower and upper case letters.
 g T Turn the Rotary Switch until the letter you want is high-
lighted.
 k T Press the Rotary Switch to confirm the letter.
T Continue until the new product name you want is displayed.
E Please note that there is a maximum text length.
T Press the ‘Save’ button.
‘Saved’ appears briefly on the display.
The new product name is displayed.
 O T Press the P button to exit programming mode.
‘Please select product’
By instructing your JURA F9 to automatically switch itself off, you
can cut down your energy consumption. If this function is activated,
your JURA F9 switches off automatically after the preset time follow-
ing the last action on the machine.
You can set the automatic switch-off to 15minutes, 30minutes or
1–9hours.
Precondition:‘Please select product’ is displayed.
 O T Press the P button.
‘Maintenance status’ (‘1/7’)
 g T Turn the Rotary Switch until ‘Machine settings’ (‘4/7’) is dis-
played.
T Press the ‘Switch off after’ button.
‘Switch off after’
 g T Turn the Rotary Switch to change the switch-off time (e.g. to
‘2hrs.’).
T Press the ‘Save’ button.
‘Saved’ appears briefly on the display.
‘Machine settings’
 O T Press the P button to exit programming mode.
‘Please select product’
Automatic switch-off