JURA F9 Instructions for Use The Instructions for Use has been awarded the seal of approval by the independent German Technical Inspection Agency, TÜV SÜD, due to its easy-to-understand style, its thoroughness and coverage of safety aspects.
Table of contents Your JURA F9 Control elements 4 Important information 6 Proper use....................................................................................................................................................... 6 For your safety................................................................................................................................................ 6 1 Preparing and using for the first time 10 JURA on the Internet...............................................
Table of contents 5 6 7 8 9 10 11 Maintenance 33 Rinsing the machine.................................................................................................................................... 33 Rinsing the milk system..............................................................................................................................34 Cleaning the milk system...........................................................................................................................
Control elements Control elements 8 9 10 1 11 2 12 3 4 13 14 5 6 7 1 2 3 4 5 6 7 4 Bean container with aroma preservation cover Water tank cover Water tank Power switch and mains cable (back of the machine) Coffee grounds container Drip tray Cup grille 8 9 10 11 12 13 14 Filler funnel cover Filler funnel for ground coffee Storage compartment cover Grinder adjustment switch Measuring spoon for ground coffee Hot-water spout Height-adjustable dual spout
Control elements 1 2 3 P 4 5 6 Top of the machine 1 Q On/Off button 2 g Rotary Switch 3 O P button (programming) Front 4 Display 5 Multi-function buttons (button function depends on what is shown in the display) 6 l Switch for hot water preparation 5
Important information Important information Proper use The machine is designed and intended for private domestic use. It should only be used for coffee preparation and to heat milk and water. Use for any other purpose will be deemed improper. JURA Elektroapparate AG cannot accept any responsibility for the consequences of improper use. Before using the machine read these instructions for use thoroughly and completely and comply with the instructions they contain.
Important information UU Never open and repair the machine yourself. UU Do not modify the machine in any way that is not described in these instructions for use. The machine contains live parts. If opened, there is a danger of potentially fatal injury. Repairs may only be carried out by authorised JURA service centres, using original spare parts and accessories.
Important information UU Only connect the machine to the mains volt- UU UU UU UU UU UU UU UU UU 8 age in accordance with the information on the rating plate. The rating plate is located on the underside of your JURA F9. Further technical data is provided in these instructions for use (see Chapter 9 ‘Technical data’). Connect the JURA F9 directly to a domestic power socket. Using multi-socket adapters or extension cords may cause overheating. Please only use original JURA maintenance products.
Important information People, including children, who UU do not have the physical, sensory or mental capabilities to use the machine safely or UU are inexperienced or lack knowledge in how to use the machine safely must be supervised by a responsible person when using it, or must be instructed in how to use it correctly. Safety when handling the CLARIS Blue filter cartridge: UU Filter cartridges should be kept out of the reach of children. UU Store filter cartridges in a dry place in the sealed packaging.
1 1 Preparing and using for the first time Preparing and using for the first time JURA on the Internet Visit us on the Internet. You can download short operating instructions for your machine from the JURA website (www.jura.com). You will also find interesting and up-to-date information on your JURA F9 and on every aspect of coffee. Setting up the machine When setting up your JURA F9, please note the following: Place the JURA F9 on a horizontal surface that is not sensitive to water.
1 J WARNING Preparing and using for the first time If the machine is operated with a defective mains cable, there is a danger of potentially fatal electric shock. T Never use a machine which is damaged or has a defective mains cable. Precondition: The bean container has been filled. T Insert the mains plug into a power socket. 3 T Switch on the JURA F9 using the power switch on the back of the machine. Q T Press the On/Off button to switch the JURA F9 on.
1 Preparing and using for the first time T Fill the water tank with fresh, cold water and reinsert the tank. T Press the ‘Next’ button. ‘Switch open’ T Place a receptacle under the hot-water spout and dual spout. l T Turn the switch to the m position. ‘Filter is being rinsed’, water flows out of the hot-water spout. EE You can interrupt rinsing of the filter at any time. To do this, turn the switch clockwise. Turn the switch anticlockwise to continue rinsing the filter.
1 Preparing and using for the first time g T Turn the Rotary Switch to change the water hardness setting, e.g. to ‘25 °dH’. T Press the ‘Save’ button. ‘Saved’ appears briefly on the display. ‘Fill water tank.’ T Remove the water tank and rinse it with cold water. T Fill the water tank with fresh, cold water and reinsert the tank. ‘Switch open’ T Place a receptacle under the hot-water spout and dual spout. l T Turn the switch to the m position. ‘System is filling’, water flows out of the hot-water spout.
1 Preparing and using for the first time Connecting milk Your JURA F9 creates fine, creamy, feather-light milk foam with a perfect consistency. The most important requirement for frothing milk is a milk temperature of 4–8 °C. We would therefore recommend using a milk cooler or a vacuum milk container. T Remove the protective cover from the dual spout. T Connect the milk pipe to the dual spout. T Connect the other end of the milk pipe to a milk container or immerse it in a milk carton.
2 2 Preparation Preparation EE You can stop the machine at any time while a speciality coffee or hot water is being prepared. Just press any button (for a speciality coffee) or return the switch to its original position (for hot water preparation). EE During the grinding operation you can select the coffee strength of single products by turning the Rotary Switch g. EE During preparation, you can change the preset amount of water or milk foam by turning the Rotary Switch g.
2 Preparation The following additional products are shown in the product selector view: UU‘Ristretto’ UU‘2 ristretti’ UU‘2 espressi’ UU‘2 coffees’ UU‘Special’ UU‘Cappuccino’ UU‘Macchiato’ UU‘Caffè latte’ UU‘Portion milk foam’ EE The product selector view disappears automatically after 10 seconds if no preparation is started.
2 Preparation Example: Proceed as follows to prepare two coffees (using product selector view). Precondition: The start screen is displayed. T Place two cups under the dual spout. g T Turn the Rotary Switch to view the product selector. g T Turn the Rotary Switch until the ‘2 coffees’ product is in focus. k T Press the Rotary Switch to start preparation. Coffee preparation starts. The preset amount of water for coffee flows into the cups. Preparation stops automatically.
2 Preparation Ground coffee You can choose to use a second coffee variety, for example decaffeinated coffee, with the filter funnel for ground coffee. EE Never add more than two level measuring spoons of ground coffee. EE Use ground coffee which is not ground too finely. Very fine coffee can block up the system so that the coffee only comes out in drips.
2 Permanently setting the amount of water for the cup size Preparation It is easy to permanently adjust the amount of water for all single products to the cup size. Adjust the amount once as shown in the following example. Every time you prepare a drink in the future, this amount will be dispensed. Example: Proceed as follows to permanently set the amount of water for one coffee. Precondition: ‘Please select product’ is displayed. T Place a cup under the dual spout.
2 Preparation Adjusting the grinder CAUTION You can adjust the grinder on a continuous scale to suit the degree of roast of your coffee. If you adjust the consistency of grind when the grinder is not operating, the grinder adjustment switch could be damaged. T Only adjust the consistency of grind when the grinder is running. The consistency of grind is correct if the coffee flows regularly from the coffee spout. In addition a fine, thick crema forms.
3 3 Daily operation Daily operation Switching on the machine Daily maintenance of the machine and hygiene when handling milk, coffee and water are key to a perfect coffee result in the cup every time. You should therefore change the water daily. Precondition: Your JURA F9 is switched on at the power switch. T Place a receptacle under the dual spout. Q T Press the On/Off button to switch the JURA F9 on. ‘Welcome to JURA’ ‘Machine is heating’ ‘Machine is rinsing’, the system is rinsed.
3 Daily operation Regular maintenance Carry out the following maintenance actions regularly or as required: In the interests of hygiene, we recommend changing the milk pipe on a regular basis (approximately every 3 months). Replacement pipes are available from specialised dealers (JURA original accessory set for frothers). Clean the inside of the water tank, e.g. with a brush.
4 4 Permanent settings in programming mode Permanent settings in programming mode Press the P button to enter programming mode. You can navigate through the programme items and permanently save the required settings simply by turning the Rotary Switch and using the multifunction buttons.
4 Permanent settings in programming mode Product settings In the programme item ‘Product settings’ (‘3/7’) you can make the following settings: ‘Expert mode’ UUSet individual settings for all speciality coffees, milk and hot water (see Chapter 4 ‘Permanent settings in programming mode – Adjusting the product settings’). UUReplace the products on the start screen with your favourites (see Chapter 4 ‘Permanent settings in programming mode – Replacing products on the start screen’).
4 Permanent settings in programming mode Permanent settings in programming mode always follow the same model. Example: Proceed as follows to change the coffee strength for one coffee. Precondition: ‘Please select product’ is displayed. O T Press the P button. ‘Maintenance status’ (‘1/7’) g T Turn the Rotary Switch until ‘Product settings’ (‘3/7’) is displayed. T Press the ‘Expert mode’ button. ‘Expert mode’ EE Next select the button of the product for which you would like to make settings.
4 Permanent settings in programming mode T Press the ‘Expert mode’ button. ‘Expert mode’ T Press the ‘ > ’ button (bottom right) several times until ‘Macchiato’ is displayed. T Press the ‘Macchiato’ button. ‘Macchiato’ g T Press the ‘ > ’ button (bottom right) until ‘Add to favourites’ is displayed. T Press the ‘Add to favourites’ button. ‘Select position’ T Press the ‘Latte macchiato’ button. ‘Select position’ / ‘Do you want to replace the current product?’ T Press the ‘Yes’ button.
4 Permanent settings in programming mode T Press the ‘Product name’ button. The available letters, numbers and special characters appear on the display. EE By pressing the ‘abc/ABC’ button, you can switch between lower and upper case letters. g T Turn the Rotary Switch until the letter you want is highlighted. k T Press the Rotary Switch to confirm the letter. T Continue until the new product name you want is displayed. EE Please note that there is a maximum text length.
4 Permanent settings in programming mode Energy-saving mode In the programme item ‘Machine settings’ (‘4/7’) / ‘Save energy’ you can permanently set an energy-saving mode (Energy Save Mode, E.S.M.©): ‘Active’ UUSoon after the last preparation, the JURA F9 stops heating up. After about 5 minutes the message ‘Energy Save’ is displayed. UUBefore you can prepare a speciality coffee, speciality coffee with milk, or hot water, the machine must heat up.
4 Permanent settings in programming mode UU ‘Switch-on rinse’ UU‘Manual’: The switch-on rinse must be started manually. UU‘Automatic’: The switch-on rinse is started automatically. Example: Proceed as follows to specify that the switch-on rinse should be started manually. Precondition: ‘Please select product’ is displayed. O T Press the P button. ‘Maintenance status’ (‘1/7’) g T Turn the Rotary Switch until ‘Maintenance settings’ (‘6/7’) is displayed. T Press the ‘Switch-on rinse’ button.
4 Permanent settings in programming mode O Display settings T Press the P button to exit programming mode. ‘Please select product’ In the programme item ‘Machine settings’ (‘5/7’) / ‘Display’ you can set the display brightness and contrast (as a percentage). Precondition: ‘Please select product’ is displayed. O T Press the P button. ‘Maintenance status’ (‘1/7’) g T Turn the Rotary Switch until ‘Machine settings’ (‘5/7’) is displayed. T Press the ‘Display’ button.
4 Restore factory settings Permanent settings in programming mode In the programme item ‘Machine settings’ (‘4/7’) / ‘Factory setting’ the machine can be reset to its factory setting: All user settings (apart from the ‘filter’ and ‘water hardness’) are reset to factory settings. Your JURA F9 then switches off. Precondition: ‘Please select product’ is displayed. O T Press the P button. ‘Maintenance status’ (‘1/7’) g T Turn the Rotary Switch until ‘Machine settings’ (‘4/7’) is displayed.
4 Permanent settings in programming mode Querying information In the programme item ‘Information’ (‘7/7’) you can view the following information: ‘Product counter’: Number of prepared speciality coffees, speciality coffees with milk and hot water ‘Maintenance counter’: Number of maintenance programmes performed (cleaning, descaling etc.) ‘Version’: Software version UU UU UU Example: Proceed as follows to view the number of speciality coffees prepared. Precondition: ‘Please select product’ is displayed.
5 5 Maintenance Maintenance Your JURA F9 has the following integrated maintenance programmes: Rinsing the machine (‘Rinse the coffee system’) Rinsing the milk system in the dual spout (‘Rinse the milk system’) Cleaning the milk system in the dual spout (‘Cappuccino cleaning’) Changing the filter (‘Change the filter’) (only if filter is activated) Cleaning the machine (‘Clean’) Descaling the machine (‘Descale’) (only if filter is not activated) UU UU UU UU UU UU EE Clean or descale the machine, rinse th
5 Maintenance Rinsing the milk system After each milk preparation, the JURA F9 prompts you to perform a milk system rinsing. Precondition: ‘Rinse the milk system’ is displayed. T Place a receptacle under the dual spout. k T Press the Rotary Switch. ‘Milk system is being rinsed’, water flows out of the dual spout. The rinse stops automatically. Your JURA F9 is once more ready for use.
5 Maintenance T Empty the other receptacle and place it under the dual spout again. T Press the ‘Next’ button. ‘Cleaning Cappuccino’, the dual spout and the pipe are rinsed with fresh water. The operation stops automatically. ‘Milk system cleaning complete’ appears briefly on the display. Your JURA F9 is once more ready for use.
5 Maintenance T Dismantle the milk system into its individual parts. T Rinse all the parts under running water. If there are severely dried-on milk residues, firstly immerse the individual parts in a solution of 250 ml cold water and 1 capful of JURA milk system cleaner. Then rinse the parts thoroughly. T Fit the air intake pipe. 1 2 T Reassemble the milk system. When doing this, note the numbering of the individual parts. T Fit the assembled individual parts back in the dual spout and press it firmly.
5 Maintenance g T Turn the Rotary Switch until ‘Maintenance settings’ (‘6/7’) is displayed. T Press the ‘Use filter’ button. ‘Use filter’ T Press the ‘Active’ button. T Press the ‘Save’ button. ‘Saved’ appears briefly on the display. ‘Insert filter’ T Remove and empty the water tank. T Open the filter holder and insert the filter cartridge into the water tank, exerting slight pressure. T Close the filter holder. It will click into place audibly. EE After two months, the filter will cease to work.
5 Maintenance EE After two months, the filter will cease to work. Set the date on the date plate on the filter holder in the water tank. EE If the CLARIS Blue filter cartridge is not activated in programming mode, you will not be prompted to change the filter. EE CLARIS filter cartridges are available from specialised dealers. Precondition: ‘Change the filter’ is displayed. O T Press the P button. ‘Maintenance status’ (‘1/7’) T Press the ‘Change the filter’ button.
5 Cleaning the machine CAUTION Maintenance After 200 preparations or 80 switch-on rinses, the JURA F9 will prompt you to clean it. If the wrong cleaning agent is used, the machine could be damaged and/or traces could be left behind in the water. T Use only original JURA maintenance products. EE The cleaning programme lasts approximately 20 minutes. EE Do not interrupt the cleaning programme. The quality of cleaning will be impaired if you do so.
5 Maintenance T Empty the drip tray and coffee grounds container and put them back into the machine. ‘Please select product’ appears on the display. Cleaning is now complete. Descaling the machine The JURA F9 builds up deposits of limescale over time and automatically prompts you to descale it when necessary. The degree of calcification depends on the hardness of your water. EE If you use a CLARIS Blue filter cartridge and this is activated, you will not be prompted to descale.
5 Maintenance T Empty the drip tray and coffee grounds container and put them back into the machine. ‘Agent in tank’ T Remove and empty the water tank. T Completely dissolve the contents of one blister (3 JURA descaling tablets) in a receptacle holding 500 ml of lukewarm water. This may take several minutes. T Pour the solution into the empty water tank and insert it into the machine. ‘Switch open’ l y l y T Place a receptacle under the hot-water spout and dual spout.
5 Maintenance T Empty the drip tray and coffee grounds container and put them back into the machine. ‘Please select product’ appears on the display. Descaling is now complete. EE If the descaling operation stops unexpectedly, rinse the water tank thoroughly. Descaling the water tank Limescale deposits may form in the water tank. To ensure correct function of the machine, descale the water tank from time to time. T Remove the water tank. T If you use a CLARIS Blue filter cartridge, remove this.
6 6 Display messages Display messages Message ‘Fill water tank.’ Cause/Result The water tank is empty. You cannot prepare any products. Action ‘Empty grounds’ The coffee grounds container is full. You cannot prepare any products. T Empty the coffee grounds container and the drip tray (see Chapter 3 ‘Daily operation – Daily maintenance’). ‘Drip tray not fitted’ The drip tray is not inserted T Fit the drip tray. correctly or is not inserted at all. You cannot prepare any products.
7 Troubleshooting 7 Troubleshooting Problem Insufficient foam is produced when the milk is frothed, or milk sprays from the dual spout. Cause/Result The dual spout is dirty. Action Coffee only comes out in drips when it is being prepared. Coffee or ground coffee has been ground too finely and is blocking the system. The same filter cartridge may have been used several times or the water hardness set incorrectly in the programming mode. The CLARIS Blue filter cartridge is activated.
8 8 Transport and environmentally friendly disposal Transport and environmentally friendly disposal Transport / Emptying the system Keep the packaging for your JURA F9. It should be used to protect the machine during transport. In order to protect the JURA F9 from frost during transport, the system must be emptied. Precondition: ‘Please select product’ is displayed. T Remove the milk pipe from the dual spout. T Place a receptacle under the hot-water spout.
9 9 Technical data Technical data Voltage Power Conformity mark Energy consumption ‘Save energy’ / ‘Active’ Energy consumption ‘Save energy’ / ‘Inactive’ Pump pressure Holding capacity of water tank Holding capacity of bean container Holding capacity of coffee grounds container Cable length Weight Dimensions (W × H × D) 220–240 V ~, 50 Hz 1450 W A approx. 5 Wh approx. 16 Wh static, max. 15 bar 1.9 l 310 g max. 15 portions approx. 1.1 m approx. 9.8 kg 28.5 × 35.5 × 44.
10 10 A B C Index Index Addresses 52 Adjusting the product settings 24 Aroma preservation cover Bean container with aroma preservation cover 4 Automatic switch-off 27 Cover Filler funnel for ground coffee 4 Storage compartment 4 Water tank 4 Cup grille 4 Customer support 52 D Bean container Bean container with aroma preservation cover 4 Cleaning 42 Filling 10 Bus bar Technical data 46 Button On/Off button 5 P button (programming) 5 Caffè latte 17 Cappuccino 17 Cappuccino frother cleaning Cleaning t
10 G H I J L M Index Grinder adjustment switch 4 Ground coffee 18 Measuring spoon for ground coffee 4 Grounding point 46 P Hotline 52 Hot water 20 Hot water preparation Switch for hot water preparation 5 Hot-water spout 4 Instant coffee Ground coffee 18 Internet 10 JURA Contact details 52 Internet 10 Language 31 latte macchiato 17 Machine Cleaning 39 Descaling 40 Regular maintenance 22 Rinsing 33 Setting up 10 Switching off 22 Switching on 21 Mains cable 4 Maintenance 33 Daily maintenance 21 Regula
10 R S T U Index Regular maintenance 22 Renaming a product 26 Rinsing Machine 33 Ristretto 16 2 ristretti 16 Rotary Selection 15 Rotary Switch 5 Safety 6 Safety information 6 Settings Maintenance settings 28 Permanent settings in programming mode 23 Setting up Setting up the machine 10 Short operating instructions 10 Spout Height-adjustable dual spout 4 Hot-water spout 4 Switch for hot water preparation 5 Switching off 22 Switching on 21 Switch-off Automatic switch-off 27 Symbol description 3 Technica
J71806/F9/en/201407 11 11 JURA contact details / Legal information JURA contact details / Legal information JURA Elektroapparate AG Kaffeeweltstrasse 10 CH-4626 Niederbuchsiten Tel. +41 (0)62 38 98 233 @@ You will find additional contact details for your country at www.jura.com.
