Quick Reference Guide

3
GIGA 6 – Quick Reference Guide
T Remove the milk pipe from the milk container or milk cooler.
T Add milk system cleaner to the front part of the container
up to the bottom mark (indicated by 6).
T Then fill with water up to the upper mark.
T Place the container under the dual spout and connect the
milk pipe with the container.
E To connect the milk pipe to the container correctly, the pipe
must be fitted with a connector.
T Touch ‘Start’.
‘Milk system is being cleaned’, the dual spout and the milk
pipe are cleaned.
The operation is interrupted, ‘Water for cleaning milk sys-
tem’ / ‘Connect the milk tube’
T Rinse the container thoroughly and fill the front part with
fresh water up to the upper mark.
T Place the container under the dual spout and connect the
milk pipe with the container.
T Touch ‘Next’.
‘Milk system is being cleaned’
The operation stops automatically. Your GIGA is once more
ready for use.
The dual spout must be dismantled and rinsed daily if milk has been
prepared to make sure it functions perfectly and also in the interests
of hygiene.
T Remove the milk pipe and rinse it thoroughly under running
water.
6
Dismantling and rinsing
the dual spout