Quick Reference Guide

2
GIGA 6 – Quick Reference Guide
GIGA 6 – Quick Reference Guide
J
These short instructions do not replace the ‘GIGA 6 Instructions for
Use’. Make sure you read and observe the safety information and
warnings first in order to avoid hazards.
You can initiate the rinse operation manually at any time.
Precondition:The start screen is displayed.
T Place a receptacle under the dual spout.
T Press the Rotary Switch.
T Touch the c symbol.
T Turn the Rotary Switch until ‘Rinse’ is displayed in the centre.
T Touch ‘Rinse’ to start the rinse operation.
‘Machine is rinsing’, ‘Milk system is being rinsed’, water
flows out of the dual spout.
The rinse stops automatically. Your GIGA is once more ready
for use.
15 minutes after milk preparation, the milk system is automatically
rinsed. Therefore always place a receptacle under the dual spout
after preparing milk.
To ensure that the milk system in the dual spout always works prop-
erly, you must clean it daily when you have been preparing milk.
If the wrong cleaning agent is used, the machine could be damaged
and/or traces could be left behind in the water.
T Use only original JURA maintenance products.
E JURA milk system cleaner is available from specialised dealers.
E To clean the milk system, use the container supplied.
Precondition:The start screen is displayed.
T Press the Rotary Switch.
T Touch ‘Clean the milk system’.
T Touch ‘Next’.
‘Cleaning agent for milk system’ / ‘Connect the milk tube’
Rinsing the machine
Automatic milk system
rinsing
Cleaning the milk system
CAUTION