GIGA 6 – Quick Reference Guide
GIGA 6 – Quick Reference Guide GIGA 6 – Quick Reference Guide J These short instructions do not replace the ‘GIGA 6 Instructions for Use’. Make sure you read and observe the safety information and warnings first in order to avoid hazards. Rinsing the machine You can initiate the rinse operation manually at any time. Precondition: The start screen is displayed. T Place a receptacle under the dual spout. T Press the Rotary Switch. T Touch the c symbol.
GIGA 6 – Quick Reference Guide T Remove the milk pipe from the milk container or milk cooler. T Add milk system cleaner to the front part of the container up to the bottom mark (indicated by 6). T Then fill with water up to the upper mark. 6 T Place the container under the dual spout and connect the milk pipe with the container. EE To connect the milk pipe to the container correctly, the pipe must be fitted with a connector. T Touch ‘Start’.
GIGA 6 – Quick Reference Guide T Press the releasing devices and pull the cover of the dual spout up and off. T Carefully pull the bottom part of the milk system down and off. T Remove the milk system from the dual spout. T Remove the air intake pipe. T Dismantle the milk system into its individual parts. T Rinse all the parts under running water.
GIGA 6 – Quick Reference Guide T Reassemble the milk system. When doing this, note the arrows on the individual parts (circled in red in the picture). T Fit the air intake pipe. T Fit the assembled individual parts back in the dual spout and press it firmly. T Attach the bottom part of the milk system to the part already inserted from below. T Fit the cover of the dual spout. It will click into place audibly.
GIGA 6 – Quick Reference Guide T Connect the milk pipe to the dual spout. Inserting/changing the filter Your GIGA no longer has to be descaled if you are using the CLARIS Smart filter cartridge. EE Once the filter cartridge stops working (depending on the water hardness setting), the GIGA will prompt you to change the filter. EE CLARIS Smart filter cartridges are available from specialised dealers. Precondition: The c symbol is displayed on the start screen (if you are already using a filter).
GIGA 6 – Quick Reference Guide T Empty the drip tray and coffee grounds container and put them back into the machine. The start screen is displayed. Your GIGA is once more ready for use. The CLARIS Smart filter cartridge communicates with your GIGA via RFID technology (frequency band 13.56 MHz). This wireless connection is only used for a maximum of 3 sec. during preparation. In this case, the maximum transmission power is below 1 mW.
GIGA 6 – Quick Reference Guide T Insert a JURA cleaning tablet into the filler funnel. T Close the cover of the filler funnel. ‘Press the Rotary Switch’ T Press the Rotary Switch. ‘Machine is being cleaned’, water flows out of the dual spout repeatedly. The operation stops automatically. ‘Empty coffee grounds container’ T Empty the drip tray and coffee grounds container and put them back into the machine. Cleaning is now complete. The start screen is displayed.
GIGA 6 – Quick Reference Guide Precondition: The c symbol is displayed on the start screen. T Press the Rotary Switch. The ‘Descale’ message lights up red. T Touch ‘Descale’. T Touch ‘Start’. ‘Empty drip tray’ T Empty the drip tray and coffee grounds container and put them back into the machine. ‘Pour descaling agent into water tank’ T Remove and empty the water tank. T Completely dissolve 3 JURA descaling tablets in a receptacle holding 600 ml of water. This may take several minutes.
GIGA 6 – Quick Reference Guide T Empty the drip tray and coffee grounds container and put them back into the machine. Descaling is now complete. The start screen is displayed. EE If the descaling operation stops unexpectedly, rinse the water tank thoroughly. Cleaning the bean container Coffee beans may be covered with a slight oil film which remains on the walls of the bean containers. These traces may negatively affect the coffee result. For this reason clean the bean containers from time to time.
GIGA 6_Kurz/en/201909 GIGA 6 – Quick Reference Guide Descaling the water tank Limescale deposits may form in the water tank. To ensure correct function of the machine, descale the water tank from time to time. T Remove the water tank. T If you use a CLARIS Smart filter cartridge, remove this. T Completely fill the water tank and dissolve 3 JURA descaling tablets in it. T Leave the water tank with the descaling solution for several hours (e.g. overnight). T Empty the water tank and rinse it thoroughly.
