User Manual Copyright ⓒ 2019. Lab-T, Inc.
JUNSUNG TECH Co., Ltd.
Features SM 1000S is a 2.4GHz portable digital wireless amplifier. It has a high output of 30W and weight only 300g because it is an ultralight and micro-mini product. With the 2.4GHz FHSS technology, the product will not be affected by noise and frequency interference. The portable microphone amplifier has the highest output of 30W among the product of same capacity. Due to the line out function, it can be used as a receiver by being connected to existing microphone amplifiers.
ITEM SPECIFICATION Max. Output 40W Min. (4ohm speak load) Distortion 5% Max. SPL 95dB/W ±2dB Hum & Noise 50dB Min. AF Response ±2dB (at 260Hz~15KHz) Power Source Li-polymer 3.7V x 2 Size 89 x 115 x 43mm (W/H/D) Weight 300g 1. Power On/Off ① Press and hold the main power switch to turn on the power. ② When the power is turned on, the remaining battery level indicator lights up on the top LCD display.
2. Connecting Wireless Microphone ① urn on the main unit and the wireless microphone. ② When the wireless microphone is connected to the main unit, the LED on the microphone side lights green and the main unit displays the wireless connection icon on the LCD window. 3. Battery Level Indicator and Charging Battery remaining status If the LCD remains one space, charge the battery.
4. Battery Change The main unit has a built-in rechargeable Li-polymer battery. The built-in battery is removable so you can easily replace it if you have run out of battery life. 5. Efficient Wireless Microphone Turn on the power (A) of the main unit and raise the main volume (B) just before the + mark. The volume control uses the ▲▼buttons to adjust the volume, and the volume level is 4 levels. The adjusted sound state remains the same even when the power is turned off and on.
6. Registration Method If wireless connection is not qualitativelyWhen you use a new wireless microphone, you can easily re-register and use it. A. Insert the clip into the registration switch hole at the bottom left of the main body and hold down the power switch of the main body while pressing it. B. The wireless connection icon blinks on the main body LCD window. C. While holding down the CH button on the wireless microphone, turn on the power switch. D.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
