Operating Guide

1023
www.junolightinggroup.com
Rev - 4/10
Undercabinet Lighting
Pro-Series Xenon Low Voltage
1-Lamp, 2-Lamp, 3-Lamp, 4-Lamp Fixtures
Description
The Pro-Series Xenon series offers a slightly warmer
color rendering than halogen using warmer tone
illumination from long-life low voltage xenon lamps.
Pro-Series Xenon fixtures are optimized for fast,
permanent installation, mounting either flush to the
backsplash or to the front lip of cabinetry to suit project
conditions and homeowner preference.
Listing
UL/C-UL Listed
Finishes
Ordering Information*
Catalog No. Description
UPX109-BL 9", 1 Lamp, Black
UPX109-BZ 9", 1 Lamp, Brushed Bronze
UPX109-SL 9", 1 Lamp, Brushed Silver
UPX109-WH 9", 1 Lamp, Designer White
UPX214-BL 14", 2 Lamps, Black
UPX214-BZ 14", 2 Lamps, Brushed Bronze
UPX214-SL 14", 2 Lamps, Brushed Silver
UPX214-WH 14", 2 Lamps, Designer White
UPX322-BL 22", 3 Lamps, Black
UPX322-BZ 22", 3 Lamps, Brushed Bronze
UPX322-SL 22", 3 Lamps, Brushed Silver
UPX322-WH 22", 3 Lamps, Designer White
UPX430-BL 30", 4 Lamps, Black
UPX430-BZ 30", 4 Lamps, Brushed Bronze
UPX430-SL 30", 4 Lamps, Brushed Silver
UPX430-WH 30", 4 Lamps, Designer White
Designer White
Brushed Silver
Brushed Bronze
Accessories
Catalog No. Description
JC3-8-BL 8" Jumper Cord, Black
JC3-8-WH 8" Jumper Cord, Designer White
JC3-17-BL 17" Jumper Cord, Black
JC3-17-WH 17" Jumper Cord, Designer White
JC3-26-BL 26" Jumper Cord, Black
JC3-26-WH 26" Jumper Cord, Designer White
ULH-CONN 3/8" Miniature Die-Cast
Electrical Connector
ULH-CP-BL 6' Cord and Plug, Black
ULH-CP-WH 6' Cord and Plug, Designer White
ULH-DWM-BL Direct Wire Module, Black
ULH-DWM-WH Direct Wire Module, Designer White
UPX-LAMP 12V 20W Bi-pin High-Output Xenon
Replacement Lamp
*Fixture includes: 12V 20W Bi-pin high-output xenon lamp(s)
Mounting hardware
Electrical connector (ULH-CONN)
Joiner connector
Dimensions
4 1/2"
1"
Features
12-volt xenon lamps offer slightly warmer color
rendering as compared to halogen
Integral reflector spaced away from cabinet
bottom maximizes light output while reducing
fixture/cabinet contact temperature
Dimmable with standard ELV type wall box
dimmers or integral high/low/off rocker switch
Hinged lens captured by spring loaded retention
bar cannot accidentally fall out
Modular design for maximum flexibility and quick
installation allows up to ten fixtures to plug
together using the supplied internal straight
connector or optional jumper cords
Rear wireway access cover with flush non-metallic
cable clamp and push in electrical connectors
facilitate wiring without opening the fixture
Miniature die-cast fitting for flexible metal
conduit, off-center knock-outs and extra mounting
plate for feed-through fixture-to-fixture loop
wiring increase installation versatility
Available in Black, Brushed Bronze, Brushed Silver
and Designer White finishes
Black

Summary of content (1 pages)