Specification

Project:
Fixture Type:
Location:
Contact/Phone:
1300 S. Wolf Road • Des Plaines, IL 60018 • Phone [phone] • Fax [phone] • Visit us at www.junolightinggroup.com
Printed in U.S.A. ©2016 Acuity Brands Lighting, Inc. Rev. 08/31/16
1 of 2
I1.5.0
PRODUCT DESCRIPTION
The Pro-Series Xenon modular series with integral electronic transformer
operates 12-volt halogen lamps to deliver the best color rendering with
maximum light out put and lamp life. The efficient operation of low voltage
lamps, along with a unique housing/reflector system, reduces mounting surface
temperatures well below what is typical for xenon undercabinet fixtures.
Pro-Series Xenon fixtures are optimized for fast permanent installation, mounting
either flush to the rear backsplash or to the front lip of cabinetry to suit project
conditions and homeowner preference.
PRODUCT SPECIFICATIONS
Lamps 20W-12-volt xenon bi-pin high output lamps supplied with fixture
• Projected 10,000 hour life based on actual operating voltage in fixture.
Transformer Integral electronic 120 to12-volt step down transformer is
accessible for maintenance without having to remove fixture.
Housing Extruded Aluminum • Designer white, black, brushed bronze,
or brushed silver finish.
Reflector Specular aluminum reflector behind each lamp.
Diffuser Clear prismatic tempered glass lens for maximum light transmission
• Reverse-angled to minimize perceived brightness
• Captive lens has hinged design for tool-less relamping • Spring loaded
retention bar prevents lens from accidently being bumped loose.
Switch Convenient integral Hi/Lo/Off rocker switch.
Dimming For best results use dimmer specifically designed for use with
electronic low voltage transformers.
Labels UL Listed.
INSTALLATION
UPX series fixtures optimized with a center rear wiring access compartment
and push-in 3-wire electrical connectors for quick electrical connection without
having to open the fixture or remove the lens. Rear wiring access compartment
covers provided with push-in connector for non-metallic cable and knockout for
feed thru wiring capability. Multiple off-center knockouts provided in two, three
and four lamp fixtures. Die-cast fitting for 3/8” flexible metal conduit supplied
in a hardware pack. Fixtures may be mounted flush to the backsplash or up
against the front lip of the cabinetry using captive mounting screws.
Portable To install a portable fixture, use the optional 3-wire grounded cord &
plug (U6CP sold separately).
Optional Direct Wire Optional direct wire module (UDWM sold separately)
facilitates code-compliant installation of fixture at front edge of cabinetry.
Supplied with 36” field-shortenable jumper cord to bring power to either end of
the fixture.
Electrically Connecting Multiple Fixtures Up to 10 fixtures may be electrically
joined together using either the straight joiner connector supplied with each
fixture or the optional JC3 jumper cords • See accessories table for lengths and
finishes.
DIMENSIONS
UNDERCABINET LIGHTING
PRO-SERIES XENON
20W - 12-volt Xenon Lamps
UPX109 UPX214 UPX322 UPX430
Total input power (watts) 20 40 60 80
Total Operating AMPS .17 .34 .50 .70
Power Factor .99 .99 .99 .99
Maximum cabinet bottom contact temperature: less than 60˚ C.
ENGINEERING DATA
UPX109, UPX214,
UPX322 and UPX430
ORDERING INFORMATION (Type fixture options in the blank form fields below) Example: UPX214 WH
Series Finish
UPX109
Pro-Series Xenon Undercabinet, 9" 1 Lamp
BL
Black
UPX214
Pro-Series Xenon Undercabinet, 14" 2 Lamp
BZ
Brushed Bronze
UPX322
Pro-Series Xenon Undercabinet, 22" 3 Lamp
SL
Brushed Silver
UPX430
Pro-Series Xenon Undercabinet, 30" 4 Lamp
WH
White
PRO-SERIES XENON 5 MINUTE DIRECT-WIRE INSTALLATION
Step 1 Attach supply
wires to rear access cover.
Step 2 Connect supply
wires to fixture leads using
push-in connectors.
Step 3 Mount fixture
to cabinet bottom using
captive mounting screws.
1"
4 1/2"