Specification

Project:
Fixture Type:
Location:
Contact/Phone:
1300 S. Wolf Road • Des Plaines, IL 60018 • Phone [phone] • Fax [phone] • Visit us at www.junolightinggroup.com
Printed in U.S.A. ©2016 Acuity Brands Lighting, Inc. Rev. 08/31/16
1 of 3
I1.6.0
PRODUCT DESCRIPTION
Pro-Series Fluorescent modular series luminaires offer highly efficient
illumination in a shallow, easy-to-conceal profile. Ideal for undercabinet,
undershelf, and task lighting, where maximum energy efficiency, long
lamp life, and cool operation are desired. Pro-Series Fluorescent fixtures
are optimized for fast permanent installation, mounting either flush to the
rear backsplash or to the front lip of cabinetry to suit project conditions and
homeowner preference.
PRODUCT SPECIFICATIONS
Lamps Latest generation of high-efficiency (HE), high color rendering 3000K
T5 tri-phosphor fluorescent lamps • 10,000 hour rated lamp life.
Ballast State of the art 120V electronic ballast instantly starts lamp and
operates without flicker or hum.
Housing Extruded Aluminum • Designer white, black, brushed bronze, or
brushed silver finish.
Diffuser Extruded non-yellowing clear UV/impact resistant acrylic lens.
Switch Available with convenient on/off rocker switch.
Optional Integral Occupancy Sensor 22”, 34” and 46” are available with
Passive Infrared (PIR) Occupancy Sensor. The PIR sensor has a field adjustable
time delay that can be set from 30 sec. to 30 min. All additional luminaires
connected to the luminaire with occupancy sensor will be controlled by the
single sensor.
Labels UL/C-UL Listed.
INSTALLATION
UPF Series fixtures offer several convenient methods for installation and can
be installed as direct wire or portable luminaires. Fixtures may be mounted
flush to the backsplash or up against the front lip of the cabinetry using captive
mounting screws.
Direct Wire The UPF Series are optimized with a center rear wiring access
compartment and push-in electrical connectors for quick electrical connection
using non-metallic or armored cable • Features multiple off-center knockouts
and are supplied with die cast fittings for 3/8” flexible metal conduit
• Optional direct-wire modules sold separately supplied with a jumper cord
to bring power to the fixture, is also available to facilitate code compliant
installation of fixture at the front end of cabinetry
Portable To install a portable fixture, use the optional 3-wire grounded cord
& plug (U6CP sold separately), or specify 6CP option (sold separately).
Electrically Connecting Multiple Fixtures Up to 10 fixtures may be
electrically joined together using either the straight joiner connector supplied
with each fixture or the optional JC3 jumper cords • See accessories table for
lengths and finishes.
DIMENSIONS
UNDERCABINET LIGHTING
PRO-SERIES FLUORESCENT
8W, 14W, 21W & 28W
T5 HE Fluorescent Lamps
UPF12 UPF22 UPF34 UPF46
Total input power (watts) 8.4 15.3 22.1 30.3
Total Operating AMPS .13 .23 .32 .45
Power Factor .52 .53 .57 .56
ENGINEERING DATA (120V)
UPF12, UPF22, UPF34 and UPF46
PRO-SERIES FLUORESCENT 5 MINUTE DIRECT-WIRE INSTALLATION
Step 1 Attach supply
wires to rear access cover.
Step 2 Connect supply
wires to fixture leads using
push-in connectors.
Step 3 Mount fixture
to cabinet bottom using
captive mounting screws.
1"
4 1/2"
ORDERING INFORMATION (Type fixture options in the blank form fields below) Example: UPF12 BL 6CP NS
Series Finish Portable Wiring Control Option
UPF12
Pro-Series Fluorescent Undercabinet, 12"
BL
Black
6CP
1
Portable w/ 6' Cord & Plug
Blank
Rocker Switch
UPF22
Pro-Series Fluorescent Undercabinet, 22"
BZ
*
Brushed Bronze
NS
No Switch
UPF34
Pro-Series Fluorescent Undercabinet, 34"
SN
Satin Nickel
OC
1
Occupancy Sensor with Switch
UPF46
Pro-Series Fluorescent Undercabinet, 46"
WH
White
OCN
1
Occupancy Sensor w/o Switch
* Bronze not available for UPF46
1
Portable wiring cannot be used with occupancy sensors