Dimensions Guide

1300 S. Wolf Road • Des Plaines, IL 60018 • Phone [phone] • Fax [phone] • Visit us at www.acuitybrands.com/juno-trac
Printed in U.S.A. ©2017 2019 Acuity Brands Lighting, Inc. Rev. 7/22/19
3 of 6
D2.1.0
TRAC-LITES
One Circuit Trac System
TRAC SECTIONS & SYSTEM COMPONENTS
R Series
Trac Joiners & Dead End
Examples: R20 BL, R25 RP WH
R20 R23 R24
‡ R25 ‡ R25 RP ‡
BL, BZ, SL, WH BL, BZ, SL, WH BL, BZ, SL, WH BL, BZ, SL, WH BL, BZ, SL, WH
Accordion Adjustable
Joiner
Miniature Straight
Connector
Adjustable Connector “T” Connector “T” Connector
Can flex to 90° angle to left, right, up or
down. Joins two trac sections.
Joins two trac sections end to end. Joins two trac sections to make a 90
º
angle or straight run. Straight and right
angle covers supplied. For outlet box feed,
No. T27 cover plate required.
Joins three trac sections. For outlet
box feed, No. T27 cover plate
required.
Same as R25 except designed for
use in opposite polarity orientation
compared to standard feed connectors.
T27 R28 R49
BL, BZ, SL, WH BL, BZ, SL, WH BL, BZ, SL, WH
Outlet Box Cover Trac Dead End Trac Continuation Kit
Use with Nos. R24/R25 for outlet box
electrical feed. Includes: nipple, locknut
and ground screw.
For use with field-cut trac sections. Permits trac to continue a run around
obstructions. Includes one R34 Conduit
Feed and one R34 RP Conduit Feed. Fits
standard 1/2” conduit.
‡ R24 and R25 may not be used as feed connectors in Canada
due to special grounding requirements.