Specification

PRELIMINARY
H6.6.2
Project:
Fixture Type:
Location:
Contact/Phone:
MSL SERIES
LED MINI SECURITY LIGHT
650 LUMENS
Cat. No.:
PRODUCT DESCRIPTION
The MSL Series LED Security Light is a small and
unobtrusive luminaire designed to replace small
incandescent and CFL fixtures. With a shallow profile,
the MSL blends in seamlessly with both architecture and
nature. The wide light pattern makes this fixture a great
choice for commercial applications where an economical
LED security light is needed. The MSL Security Light is
recommended for mounting heights of up to 10 feet,
for installations above doors, balconies, garage and
warehouse entrances, and other applications traditionally
lighted with incandescent and CFL fixtures. The MSL Series
is rated for outdoor or indoor use.
PRODUCT SPECIFICATIONS
Optics The MSL Series has a white reflector and micro-
prism lens that significantly reduces glare, increases visual
comfort and acts as an environmental seal, protecting the
LED from rain, snow and dust.
Dark Sky Compliance The MSL Series is compliant with
most Dark Sky ordinances.
Construction A die cast aluminum housing is sturdy and
attractive. Powder coating seals and protects the fixture
from the elements • The micro-prism lens is made of
acrylic that has a strong resistance to UV rays – ideal for
outdoor environments.
Thermal Management The LED light source is secured to
the aluminum housing that acts as a heat sink • The driver
is also mounted directly to the housing to help keep the
electronics cool and ensure 100,000 hour L70 performance.
Electrical The LED driver is suitable for 120-277VAC 50/60
Hz • An optional daylight sensor is available.
Daylight Sensors The MSL Series can be ordered with an
optional daylight sensor for automatic dusk to dawn
operation • Option “PC” is a factory installed, button style
photo sensor mounted on the front of the fixture. Fixtures
with motion sensor option are automatically supplied with
a photo sensor to prevent operation of the fixtures during
daylight hours. Fixtures with emergency battery are not
available in combination with a daylight sensor.
Motion Sensor: An optional motion sensor is also
available to control operation of the fixture based on
occupancy • All fixtures with the motion sensor option
include a daylight sensor to prevent the fixture from
operating during daytime hours • The sensor turns the
fixture ON when it detects motion, and off after a user-
established time • The time the fixture stays ON can be set
from a few seconds to a total of 20 minutes.
Emergency Battery: When emergency lighting is required,
the MSL fixtures can be ordered with an optional, integral
emergency battery • The battery will operate the fixture
for 90 minutes during a power outage • Fixtures with this
option need an un-switched power source to make sure
the battery stays charged • A second switched source
can be used for the main power to the fixture • The
battery option will operate in ambient temperatures of
between -4˚F and 122˚F (-20˚C and 50˚C) • Not available in
combination with photo sensor option.
Shown with daylight sensor
6/15
1300 S. Wolf Road • Des Plaines, IL 60018 • Phone [phone] • Fax [phone]
220 Chrysler Drive • Brampton, Ontario • Canada L6S 6B6 • Phone [phone] • Fax [phone]
Visit us at www.junolightinggroup.com ©2016 Acuity Brands Lighting, Inc.
DIMENSIONS
5''
2-5/8''
5-1/8
''
1-7/16''
4-5/16''
5-7/8''
6-1/16
''
Standard
Shown with motion sensor
Shown with
emergency battery
Mounting Mounts directly to a junction box • The back
plate includes knockouts to fit most junction boxes •
The installation process takes less than 5 minutes, with
a single screw securing the housing to the back plate •
Alternatively, the MSL Series has a provision for rear entry
of 1/2” conduit • Fixtures with optional motion sensor or
battery backup also include two threaded and plugged
holes for side entry with 1/2” conduit.
Finish Polyester powder coating protects the housing
• Available in bronze or white finishes.
Specifications subject to change without notice.