User manual

7. "Eco dry" button (Trocknen Aus)
When this button is pressed, the last rinse is not
heated, with a significant saving in electrical
energy.
The corresponding pilot light comes on.
If the pilot light is not on, the water of the
last rinse will always be heated up to 65°C.
8. "Delay start" button (Startzeit)
Allows the start of the programme to be delayed
by a minimum of 1 hour, up to 9 hours.
How to set the "Delay start":
When the button is pressed, the number "0"
appears in the display.
Press the button again to select the number of
hours by which you wish to delay the
programme start, up to a maximum of 9.
E.g.: if you have selected number "2", the wash
programme will start in 2 hours time.
To cancel the delay start set, press the button
until the number "0" appears.
Close the dishwasher door to start the
countdown: a long audible signal (about one
second) informs you that the function is active.
You will see, in the display, how long there is to
go (in hours) before the programme starts. A
flashing dot in the digital display means that the
delay start function has been activated.
Opening the door has no effect on a countdown
which has already been started.
9. "Cancel programme" button
(Löschen)
If you wish to cancel a programme which is
already running or a setting which has just been
made, press this button for about 2 seconds
until the short "instruction accepted" signal is
heard.
The programme selector light flashes, to
indicate that the dishwasher has turned to reset
mode and that a new programme and new
options may be selected.
10. "Intensive" programme
indicator light (Intensiv)
This pilot light comes on when the most
energetic programme is selected (nr. 2 Intensive
70°c) with a hot prewash, suitable for pans and
particularly dirty crockery.
33
PCP27/1GB