Geschirrspüler Dishwasher JSV 5960 Gebrauchsanweisung Instruction booklet
Contents For the user For the installer Important safety information 30 Description of the appliance 31 The control panel 32 Before use Setting the water softener Rinse aid Use of detergent 34 34 36 37 Using your appliance Loading your appliance Adjusting the height of the upper basket 38 38 39 Hints and tips 40 Washing programmes 41 Hints for test centres 42 Operating sequence 43 Maintenance and cleaning Internal cleaning Cleaning the central filter Cleaning the large filter External cl
Important safety information It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is left with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant safety information. This information has been provided in the interest of safety.
Description of the appliance 1 2 12 11 3 10 4 5 9 8 7 6 IN75 1. Levelling spacers 10. Central filter 2. Upper basket stop 11. Upper spray arm 3. Salt container 12. Upper basket 4. Lower spray arm 5. Detergent dispenser 6. Control panel 7. Rating plate 8. Rinse aid dispenser 9.
The control panel 1 2 3 In this fully integrated appliance the controls are located on the top of the door. When selecting a programme, the door needs to be partially opened. Audible signals have been introduced to help indicate which operations the dishwasher is performing. 456 7 8 9 10 1. "On/Off" pushbutton (Ein/Aus) Press this button to preset the dishwasher to accept settings (selection of wash programme, economy drying, etc.).
7. "Eco dry" button (Trocknen Aus) 10. "Intensive" programme indicator light (Intensiv) When this button is pressed, the last rinse is not heated, with a significant saving in electrical energy. The corresponding pilot light comes on. If the pilot light is not on, the water of the last rinse will always be heated up to 65°C. This pilot light comes on when the most energetic programme is selected (nr. 2 Intensive 70°c) with a hot prewash, suitable for pans and particularly dirty crockery. 8.
Before use Before using your dishwasher for the first time: 1. ensure that the electrical and water connections comply with the installation instructions 2. remove all packaging from inside the appliance 3. set the water softener 4. pour 1 litre of water inside the salt container and then fill with salt 5. fill the rinse aid dispenser.
Filling with salt Only use salt specifically designed for use in dishwasher. All other types of salt not specifically designed for use in dishwasher, specially table salt, will damage the water softener. Only fill with salt just before starting one of the complete washing programmes (not the Rinse and Hold programme).This will prevent any grains of salt or salty water, which may have been spilled, remaining on the bottom of the machine for any period of time, which may cause corrosion. To fill: 1.
Rinse aid Rinse aid is automatically added during the last rinse, ensuring through rinsing, spot and streak free drying. The dispenser, which is positioned inside the door, holds about 110 ml of rinse aid, which is sufficient for 16 - 40 dishwashing programmes, depending upon the dosage setting. Filling with rinse aid: 1. Open the container by turning the lid (A) anticlockwise. A 2. Add the rinse aid until the container is completely full (approx. 110 ml). The indicator (B) will be completely dark.
Use of detergent Only use detergents specifically designed for use in dishwashers. If using powder detergents proceed as follows: 1. Open the dispenser lid by pulling the catch (D). 2. Add the detergent according to the recommendations in the programme chart. As all detergents are not the same, you should also consult the instructions on the packet specially for tablets.
Using your appliance Loading your appliance Before placing dishes in the machine, remove any scraps of food, to avoid clogging the filters and consequently reducing the performance. Do not load very small items which can fall through the baskets. Open the door and slide out the baskets to load the dishes. The lower basket UI49 The lower basket is designed to take saucepans, lids, plates (up to 27 cm in diameter), salad bowls, cutlery etc.
The upper basket The upper basket is designed for plates (dessert plates, saucers, dinner plates of up to 24 cm in diameter), salad bowls, cups and glasses. Arrange items on and underneath the fold-down cup racks so that water can reach all surfaces. For taller items, the cup racks can be folded upwards. Long-stem glasses can then be suspended from the prongs of the cup racks. Light items (plastic bowls etc.) should be loaded in the upper basket and arranged so they do not move.
Hints and tips To save energy Items not suitable for dishwashers: Place dishes in the machine immediately after every meal and wait until the dishwasher is full before washing.
Washing programmes Programme 1. Rinse and Hold 2. Intensive 70°C Degree of soil and type of load Required pushbuttons on the dispenser lid On Off Heavy soil. Crockery, cutlery, pots and pans On Off Programm 25 g 10 g 25 g 5g 25 g 5g Programm / Normal soil. Crocker and cutlery On Off Programm 4. Normal 65°C with prewash Normal soil. Crockery and cutlery On Off Programm 5. Normal 50°C with prewash Normal soil. Crockery and cutlery On Off Programm 6.
Hints for test centres Before starting any test it is necessary to fill completely with salt the salt container and with rinse aid the rinse aid dispenser.
Operating sequence 1. Check the filters 7. Ensure they are clean and properly positioned (see cleaning instructions). 2. 3. Close the door. An audible signal of about 1 second advises you that the programme has started and the programme selector (Programm) pilot light becomes fixed. Check that there is rinse aid and salt If the "Eco dry" has been selected the corresponding pilot light remains on.
9. Switch off the dishwasher Open the door. Depress the On/Off button to switch the dishwasher off. 10. Cancel the wash programme This operation occurs with the door partially opened. To change a wash programme in progress depress the "Cancel" (Löschen) programme button; the previous setting has been cancelled and you can now selected a new setting. If during the selection of a programme you press this button the dishwasher will return to setting mode.
Maintenance and cleaning Internal cleaning Ensure that the seals around the door, the detergent and rinse aid dispensers are cleaned regularly with a damp cloth. We recommend every 3 months to run a 65°C wash programme without dishes using detergent. Cleaning the central filter (After each wash) Scraps of food may accumulate in the drain filter (A) and should be removed by rinsing the filter under running water. To remove the drain filter: simply pull it out by the handle.
External cleaning Clean the external surfaces of the machine and control panel with a damp soft cloth. If necessary use only neutral detergents. Never use abrasive products, scouring pads or solvent (acetone, trichloroethylene etc....). Prolonged periods of non-operation If you are not using the machine for any period of time you are advised to: 1. Unplug the appliance and then turn off the water; 2. Fill the rinse aid dispenser; 3. Leave the door ajar to prevent the formation of any unpleasant smells; 4.
Something not working Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer. Before contacting your local Service Force Centre, please carry out the checks listed below. The dishwasher is fitted with a number of alarm systems which can help you to quickly determine the cause of any problems. The following alarms, in the form of letters (A, C, F, L, H, P) flash in the digital display window.
Symptom Fault / Solution The dishes are not clean (poor wash) ● ● ● ● ● ● ● ● ● ● The baskets are too full. The dishes have not been arranged properly. The spray arms do not rotate. The spray arms are clogged. The filters are clogged. The filters are not in position. Not enough detergent has been used or it is unsuitable. The detergent is old or has gone hard. The salt container cap is not properly closed. The washing programme selected is too gentle.
Installation instruction Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. Any plumbing work required to install this appliance should be carried out by a qualified plumber or competent person. Technical specifications DIMENSIONS Width Height Max depth Max depth with open door 59.6 cm 81.8 - 87.8 cm 55 cm 111.
Remove all packaging before positioning the machine. If possible, position the machine next to a water tap and a drain. Water supply connections This dishwasher may be fed with either hot (max. 60°) or cold water. Nevertheless we advise you a cold water supply. A hot water supply is not always efficient with very soiled crockery as it shortens the washing programmes a lot. The water pressure must be within the limits given in the technical specifications.
Water outlet hose connection The end of the drain hose can be connected in the following ways: 2 Ø Ø 18 21 1 min 4 cm 1. To the sink outlet siphon, securing it if necessary with a clip. 2. To a stand pipe provided with vent-hole, minimum internal diameter 4 cm. min 30 cm max 100 cm The waste connection must be at a height of between 30 cm (minimum) and 100 cm (maximum) from the bottom of the dishwasher.
Building-in This dishwasher is designed to be fitted under a kitchen counter or worksurface. It is essential that the recess dimensions indicated in the diagram are followed. No further openings for venting of the dishwasher are required, but only to let the water fill and drain hose and power supply cable pass through. The recess height may be anywhere between 820 and 880 mm from the floor since the dishwasher incorporates adjustable feet (max 60 mm).
The furniture door The door on this appliance is designed for the overlay of a panel having the following dimensions: Width Height Thickness Weight 596 mm 644 - 724 mm max 20 mm max 2 - 7.5 kg max The panel height should be no more than indicated, otherwise complete opening of the door will not be possible as the furniture door panel will hit against the dishwasher plinth. The height of the panel depends on the height of adjacent kitchen units (see kitchen plinth adjustment).
Fitting the vapour protection Screw the vapour protecting strip onto the front part of the worktop using four 3.5 x 16 screws. 600 mm 600 mm II25 Fixing to the adjacent units To prevent the dishwasher tilting, it must be secured to either the worktop or adjacent kitchen cabinet/wall using the brackets supplied. Insert the two fixing brackets into the slots provided in the top front part of the dishwasher as shown in the figure. Secure the brackets to adjacent units with the 3.
Noise protection Adhesive noise protection ensures excellent noise insulation. This should be fitted when the dishwasher has been mounted in the recess and the height adjusted. Apply the protection as shown in the drawing, making sure that the non-adhesive section reaches right down to the floor. II61 Kitchen plinth adjustment To allow correct opening of the door it is sometimes necessary to cut the kitchen plinth. refer to the cutting table.
152989 38/3 de en
