User manual

Fitting the vapour protection
Fit the adhesive protection foil onto the front part of
the worktop, along the entire width.
Securing under a counter
Secure the dishwasher to the counter on the front
part by means of two 3.5 x 16 screws provided
(see fig. - point A).
Important: the dishwasher must be secured
against tilting. Therefore, make sure that the
counter it is fitted under, is suitably secured to
a fixed structure (adjacent kitchen cabinets,
wall).
Adjusting the door balance
After the door panel, the adjustment of the door
balance may be necessary.
The door of the dishwasher is balanced when it is
open in any position.
For this purpose use the two front screws. Open
the door, remove the caps and screw or unscrew
the screws.
In this way the tension of the door balancing
springs is increased or decreased respectively.
Insert the caps again.
The weight of the panel should be within the
limits given in "The furniture door" otherwise
balancing the door will not be possible.
48
PFI48GB
45°
II09
A
II03
450 mm
II85
ENGLISH