Geschirrspüler Dishwasher JSI 3741 Gebrauchsanweisung Instruction booklet
Contents ENGLISH For the user For the installer Important safety information 27 Description of the appliance 28 The control panel 29 Before use Setting the water softener Rinse aid Use of detergent 30 30 32 33 Using your appliance Loading your appliance Adjusting the height of the upper basket 34 34 35 Hints and tips 36 Washing programmes 37 Operating sequence 38 Maintenance and cleaning Internal cleaning Cleaning the central filters Cleaning the large filter External cleaning Prolonged
Important safety information This information has been provided in the interest of safety. You MUST read it carefully before installing or using the appliance. Installation ■ ■ ■ ■ ■ ■ This appliance is heavy. Care should be taken when moving it. It is dangerous to alter the specifications or attempt to modify this product in any way. Care must be taken to ensure that the appliance does not stand on the electrical supply cable.
Description of the appliance 1 ENGLISH 11 10 2 9 8 7 3 4 5 6 IN42 1. Water hardness adjustment 10. Upper basket 2. Upper basket stop 11. Levelling spacers 3. Salt container 4. Detergent dispenser 5. Rinse aid dispenser 6. Control panel 7. Filters 8. Lower spary arm 9.
ENGLISH The control panel 1 2 3 4 5 6 7 8 1. On/Off indicator light 4. Door handle 2. On/Off pushbutton To open the door press the catch in the top of the recess and pull the door toward you at the same time. To close the door simply push it. On By depressing this button the machine starts operating and, at the same time the On/Off indicator light illuminates. 5. Programme marker Off When the washing programme has finished, the machine stops automatically and the pilot light remains on.
ENGLISH Before use Before using your dishwasher for the first time: 1 ensure that the electrical and water connections comply with the installation instructions 2 remove all packaging from inside the appliance 3 set the water softener 4 fill the salt container 5 fill the rinse aid dispenser.
Filling with salt If your water is "level 1" it is already soft and therefore there is no need to use salt. ENGLISH Salt must be used from "level 2" upward. Only use salt specifically designed for use in dishwashers. All other types of salt not specifically designed for use in dishwasher, specially table salt, will damage the water softener. Only fill with salt just before starting one of the complete washing programmes (not the Rinse and Hold programme).
Rinse aid is automatically added during the last rinse, ensuring through rinsing, spot and streak free drying. The dispenser, which is positioned inside the door, holds about 110 ml of rinse aid, which is sufficient for 16 - 40 dishwashing programmes, depending upon the dosage setting. Filling with Rinse aid: 1. Open the container by turning the lid (A) anticlockwise. A 2. Add the rinse aid until the container is completely full (approx. 110 ml). The indicator (B) will be completely dark. BR01 3.
Use of detergent To fill the dishwasher with detergent proceed as follows: 1. Open the dispenser lid by pulling the catch (D). ENGLISH Only use detergents specifically designed for use in dishwashers. D 2. Add the detergent according to the recommendations in the programme chart. As all detergents are not the same, you should also consult the instructions on the packet specially for tablets.
Using your appliance Loading your appliance ENGLISH Before placing dishes in the machine, remove any scraps of food, to avoid clogging the filters and consequently reducing the performance. Do not load very small items which can fall through the baskets. Open the door and slide out the baskets to load the dishes.
The upper basket is designed for plates (dessert plates, saucers, dinner plates of up to 24 cm in diameter), salad bowls, cups and glasses; Glasses with long stems can be placed upside down in the raised cup racks. The cup rack on the left folds upwards to increase your loading flexibility. Light items (plastic bowls etc.) should be loaded in the upper basket and arranged so they do not move.
ENGLISH Hints and tips To save energy Items not suitable for dishwashers: Place dishes in the machine immediately after every meal and wait until the dishwasher is full before washing.
Washing programmes Intensiv* 65° Programm Starting position of the programmer Required pushbuttons Recommended quantity of detergent on the in the dispenser dispenser lid Cycle description Normal soil. Crockery, cutlery pots and pans 65° Intensiv On Off 20 g 5g Cold prewash Main wash up to 65°C 1 cold rinse 1 hot rinse up to 65°C Drying phase 65° NormalProgramm Light soil.
Operating sequence 1. Check the filters 9. ENGLISH Ensure they are clean and properly positioned (see cleaning instructions). 2. Check that there is rinse aid and salt 3. Load the dishes Start the programme Depress the On/Off button. The On/Off indicator light will come on and the machine will start. If you wish to interrupt the wash programme at any time press the button again. 10. At the end of the washing programme Remove any scraps of food.
Maintenance and cleaning Internal cleaning ENGLISH Ensure that the seals around the door, the detergent and rinse aid dispensers are cleaned regularly with a damp cloth. We recommend you carry out a maintenance wash every three months, by running a 65°C programme without dishes using detergent. Cleaning the central filters (after each wash) Inspect the central filters (B) and (C) and remove any scraps of food with a brush, under running water.
ENGLISH External cleaning Clean the external surfaces of the machine and control panel with a damp soft cloth. If necessary use only neutral detergents. Never use abrasive products, scouring pads or solvent (acetone, trichloroethylene etc....). Prolonged periods of non-operation If you are not using the machine for any period of time you are advised to: 1. Unplug the appliance and then turn off the water; 2. Fill the rinse aid dispenser; 3.
Something not working Symptom Solution The machine will not start ■ ■ ■ ■ The dishwasher does not fill with water ■ ■ ■ ■ The door has not been properly closed. The plug is not properly inserted in the power socket. Check the plug fuse. There is not current at the socket. Ensure the water tap is open. Ensure the mains water supply has not been cut off. The inlet hose may be squashed or bent. Reposition the hose. The inlet hose may be blocked. Switch off the water supply, and clean the filter.
ENGLISH If after all these checks, the problem persists, contact your local Service Force Centre, quoting the model and serial number. This information can be found on the rating plate located on the right hand side of the dishwasher door (see picture). Protection against flooding In order to prevent water floods, the machine has been provided with two additional devices, having the following characteristics: Prod.No. ........ Ser. No. ......... Mod. ........ RA01 1.
Installation instruction Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. ENGLISH Any plumbing work required to install this appliance should be carried out by a qualified plumber or competent person.
Remove all packaging before positioning the machine. ENGLISH If possible, position the machine next to a water tap and a drain. Water supply connections This dishwasher may be fed with either hot (max. 60°) or cold water. Nevertheless we advise you a cold water supply. A hot water supply is not always efficient with very soiled crockery as it shortens the washing programmes a lot. The water pressure must be within the limits given in the technical specifications.
Water outlet hose connection The end of the drain hose can be connected in the following ways: 2 ENGLISH Ø Ø 18 21 1 min 4 cm 1. To the sink outlet siphon, securing it if necessary with a clip. 2. To a stand pipe provided with vent-hole, minimum internal diameter 4 cm. min 30 cm max 100 cm The waste connection must be at a height of between 30 cm (minimum) and 100 cm (maximum) from the bottom of the dishwasher.
Building-in This dishwasher is designed to be fitted under a kitchen counter or worksurface. No further openings for venting of the dishwasher are required, but only to let the water fill and drain hose and power supply cable pass through. 446 It is absolutely essential that the dishwasher is disconnected from the electricity supply before gaining access to any internal component. Fit the dishwasher into appropriate housing space and connect it. 5m8a0x.
The furniture door The door on this appliance is designed for the overlay of a panel having the following dimensions: 446 cm 594 mm max 20 mm max 1,5 - 6 kg max ENGLISH Width Height Thickness Weight The panel height should be no more than indicated, otherwise complete opening of the door will no longer be possible as the panel hits against the dishwasher plinth.
Securing under a counter ENGLISH Secure the dishwasher to the counter on the front part by means of two 3.5 x 16 screws provided (see fig. - point A). A Important: the dishwasher must be secured against tilting. Therefore, make sure that the counter it is fitted under, is suitably secured to a fixed structure (adjacent kitchen cabinets, wall). II03 Adjusting the door balance After the door panel, the adjustment of the door balance may be necessary.
Kitchen plinth adjustment To allow correct opening of the door it is sometimes necessary to cut the kitchen plinth. Refer to the cutting table. ENGLISH According to dimensions (a) and (b) as shown on the figure, you will find on the following table the depth (x) of the cut to be made on the plinth. The dimensions (a) and (b) of the table are those most frequently used in the kitchen furnitures.
Total Chlorine free 152989 52/0 de en 0/0698
