User manual

Fitting the vapour protection
Fit the adhesive protection foil onto the front part of
the worktop, along the entire width.
Securing under a counter
Secure the dishwasher to the counter on the front
part by means of two 3.5 x 16 screws provided
(see fig. - point A).
Important
The dishwasher must be secured against
tilting. Therefore, make sure that the
counter it is fitted under, is suitably
secured to a fixed structure (adjacent
kitchen cabinets, wall).
Adjust the height of the plinth
Adjust the height of the plinth by following the
instructions shown in the figure.
48
PFI46GB
IN10
A
II03
450 mm
II85
ENGLISH