User manual

D648

D466

D094

20mm

2. Push the appliance up against the side opposite the

door hinge. Fix the appliance with the 4 screws

supplied. Fit the hinge cover (D), clipping it into

place.

3. Press on the seal between the appliance and the

kitchen unit.

4. Apply covers (B) on joint cover lugs and into hinge

holes.

5. Position the runners (H) at the top and bottom of the

inside of the kitchen unit as shown in the figure and

mark the position of the external holes.

After preparing the holes, screw the runners to the

kitchen unit door using 3.5x16 mm screws.