User manual

20
D013
BB
5. Press on the seal between the appliance and the
kitchen unit.
6. Apply covers (B) on joint cover lugs and into hinge
holes.
7. Separate parts A, B, C, D as shown in the figure.
PR266
A
B
C
D
20mm
A
50mm
PR166
PR33/2
C
A
8. Place guide (A) on the inside part of the furniture
door, up and down as shown in the figure and
mark the position of external holes. After having
drilled holes, fix the guide with the screws
supplied.
9. Fix cover (C) on guide (A) until it clips into place.
10. Open the appliance door and the furniture door at
90°. Insert the small square (B) into guide (A).
Put together the appliance door and the furniture
door and mark the holes as indicated in the
figure.
Remove the squares and drill holes with Ø 2 mm
at 8 mm from the outer edge of the door. Place
the small square on the guide again and fix it with
the screws supplied.
8mm
PR167
A
B
D466