User manual

The display shows and with an
indicator. This indicator shows which clock
function is activated.
5. Touch a sensor field (apart from ON /
OFF) to start the SET+GO function.
Setting the MINUTE MINDER
Use the MINUTE MINDER to set a
countdown (maximum 2 h 30 min). This
function has no effect on the operation of
the oven. You can set the MINUTE MINDER
at any time and also when the appliance is
off.
1.
Touch
.
and "00" flash in the display.
2.
Use or to set the MINUTE
MINDER. First you set the seconds,
then the minutes and the hours.
3.
Touch
or the MINUTE MINDER
starts automatically after five seconds.
When the set time ends, an acoustic signal
sounds for two minutes and 00:00 and
flash in the display.
4. Touch a sensor field or open the oven
door to stop the acoustic signal.
Setting the Time delay function
The DURATION and END can be
used at the same time, if the appliance is to
be switched on and off automatically later.
In this case, first set the DURATION and
then the END function (refer to "Setting
the DURATION" and "Setting the END" ).
When the Time delay function is
activated, the display shows a
static symbol of the oven
function,
with a dot and .
The dot shows which clock
function is on in the Clock /
residual heat display.
AUTOMATIC PROGRAMMES
WARNING! Refer to Safety
chapters.
There are 9 automatic programmes. Use an
automatic programme or recipe when you
do not have the knowledge or experience
on how to prepare a dish. The display
shows the shelf position and the default
cooking times for all automatic
programmes.
Automatic programmes
Programme number Programme name
1 ROAST BEEF
2 ROAST PORK
3 CHICKEN, WHOLE
4 PIZZA
5 MUFFINS
6 QUICHE LORRAINE
7 WHITE BREAD
8 POTATO GRATIN
9 LASAGNE
12