User manual

Button Function Description
PLUS To set the time.
Heat-up indicator
When you activate an oven function, the
bars in the display come on one by one.
The bars show that the oven temperature
increases or decreases.
CLOCK FUNCTIONS
Clock functions table
Clock function Application
TIME OF DAY To show or change the time of day. You can change the
time of day only when the appliance is off.
DURATION To set how long the appliance operates. Use only when an
oven function is set.
END To set when the appliance deactivates. Use only when an
oven function is set.
TIME DELAY To combine DURATION and END function.
MINUTE MINDER Use to set a countdown time. This function has no effect
on the operation of the appliance. You can set the MINUTE
MINDER at any time, also if the appliance is off.
00:00
COUNT UP TIMER If you do not set any other clock function the COUNT UP
TIMER automatically monitor how long the appliance oper-
ates. It is on immediately when the oven starts to heat.
The Count Up Timer cannot be used with the functions:
DURATION, END.
Setting and changing the time
After the first connection to the mains, wait
until the display shows and "12:00".
"12" flashes.
1. Press or to set the hours.
2. Press to confirm and switch to set
the minutes.
The display shows and the set hour.
"00" flashes.
3. Press or to set the current
minutes.
4. Press to confirm or the set time of
day will be saved automatically after 5
seconds.
The display shows the new time.
To change the time of day press again
and again until the indicator for the time of
day flashes in the display.
Setting the DURATION
1. Set an oven function.
2. Press
again and again until
starts to flash.
3. Press
or to set the minutes and
the hours for DURATION time.
9