Operating Guide

PRODUCT DESCRIPTION
Energy efficient LED retrofit module fits into standard 5” IC or
non-IC recessed housings • Replaces 65W incandescent lamp,
producing over 600 lumens • Dimmable with most standard
incandescent dimmers and electronic low voltage dimmers
• LED retrofit module is designed to provide 36,000 hours of life
• 5 year warranty
PRODUCT SPECIFICATIONS
LED Downlight Retrofit Trim Cast aluminum trim with white
baffle and flange • All-in-one design where LED light engine
mounts directly to trim for ease of installation into existing
5” recessed housings with medium base sockets • Provided with
torsion springs.
LED Light Engine LEDs are mounted directly to cast aluminum
housing providing superior thermal management to ensure long
life • 2700K or 3000K LED color temperature • 90 CRI minimum
• Accommodates 120 volts AC at 60Hz • Dimmable with most
standard incandescent, magnetic low voltage and electronic low
voltage dimmers • For a list of compatible dimmers,
see JUNORETROBASICS-DIM.
Electrical Connections Trim features quick connect plug installed
as standard for installation into IC20-LEDT24 and IC20R-LEDT24
housings with mating connector • Trim ships with a medium base
socket adapter whip for installation into 5” incandescent housings
with medium base sockets.
Trim Cast aluminum baffle trim with white finish • Diffusing lens
conceals the LEDs from direct view and provides uniform aperture
luminance.
Life Rated for 36,000 hours at 70% lumen maintenance.
Labels ENERGY STAR
®
Qualified • Certified to the high efficacy
requirements of California T24 • UL and cUL classified for use
with most standard UL listed 5” recessed incandescent housings
and Juno IC20-LEDT24 and IC20R-LEDT24; see below for specific
compatibility requirements • Damp location • Suitable for wet
locations (indoor covered ceilings).
Testing All reports are based on published industry procedures;
field performance may differ from laboratory performance.
Product specifications subject to change without notice.
INSTALLATION
The LED retrofit baffle trim is provided with torsion springs as standard.
COMPATIBLE HOUSINGS
The 5RLD retrofit module is compatible with most 5” recessed
housings measuring at least 4” high with an inside diameter between
5” and 5-3/4”. Removal of the housing socket plate or socket
mounting bracket may be required in order for the trim to fit properly.
Compatible housings include, but not limited to:
Juno housings: IC20, IC25 and TC20 Series
Juno quick-connect LED housings: IC20-LEDT24 and IC20R-LEDT24
VuLite housings: V5IC and V5TC Series
Halo housings: H5 Series
Thomas housings: PS5 and CR5 Series
Capri housings: QL5 Series
Lithonia housings: L5 Series
REV-8/15
5” LED RETROFIT BAFFLE TRIM
DOWNLIGHT RETROFIT FOR STANDARD 5”
RECESSED HOUSINGS
5RLD
G1.8.10
Project:
Fixture Type:
Location:
Contact/Phone:
DIMENSIONS
PRODUCT CODES
Catalog Number Description
5RLD-927-6-WWH 5” LED retrofit baffle trim, 2700K
5RLD-930-6-WWH 5” LED retrofit baffle trim, 3000K
1/4”
2 1/4”
6 3/8”
PERFORMANCE DATA
27K 3K
Input Voltage 120V 120V
Input Power Typical 11W 11W
Frequency 60Hz 60Hz
EMI/RFI
FCC Title 47, Part 15
Class B (consumer)
FCC Title 47, Part 15
Class B (consumer)
Minimum starting temp -30°C (-22°F) -30°C (-22°F)
CRI 90 min. 90 min.
CCT 2700K 3000K