Specification Sheet

1300 S. Wolf Road • Des Plaines, IL 60018 • Phone [phone] • Fax [phone] • Visit us at www.acuitybrands.com/juno-recessed
Printed in U.S.A. ©2017 Acuity Brands Lighting, Inc. Rev. 03/01/17
1 of 3
Project:
Fixture Type:
Location:
Contact/Phone:
4” TC REMODEL HOUSING
INCANDESCENT LAMPS
TC1RC
G3.1.12
PRODUCT DESCRIPTION
TC Remodel Housing designed for use in non-insulated areas
• Shallow housing construction allows for fit in 2 x 6 construction
• Juno Type TC fixtures are designed for installations where
housing and J-Box will not come into contact with insulation
• Blinking light after installation indicates that improper bulb
or trim is being used or that fixture has been improperly
covered with insulation • In U.S., insulation must be spaced
3” away from the housing and J-Box • TC Remodel Housing for
remodel application where back side of ceiling is not accessible
• Installs through an opening in the ceiling from below
• Secured in place by factory installed screw driven remodel
clamps for easy installation into ceiling material.
PRODUCT SPECIFICATIONS
Lamp Lamp ratings based on trim selected – see reverse.
Socket Detachable medium base porcelain with nickel-plated
copper screw shell.
Trims Trim selection shown on reverse.
Labels UL/cUL listed for U.S. and Canada through-branch wiring
and damp locations • Product thermally protected against
improper use of insulation • UL/cUL Listed • Trim No. 11, 12,
12SQ, 4101, 4102, V4012 and V4041 are wet location
approved for covered ceiling applications • Trims 14, 17, 17SQ,
V4017 and V4034 are wet location approved for covered ceiling
applications, when used with outdoor rated lamps.
Testing All reports are based on published industry procedures;
field performance may differ from laboratory performance.
Specifications subject to change without notice.
INSTALLATION
Junction Box Pre-wired junction box, UL/cUL listed for through-
branch wiring maximum 4 No. 12 AWG 90˚ C branch circuit
conductors (2 in, 2 out) • Junction box provided with removable
access plate, (5)
1
⁄2” knockouts, (4) Non-metallic sheathed cable
connectors and ground wire • Knockouts equipped with
pryout slots • Supplied with push-in electrical connectors for
fast installation.
Housing TC housing, 22-gauge steel with white finish
• Remodel clamps provided with #2 Quadrex drive screws
(#2 Robertson/#2 Phillips combo) • Clamps accommodate
up to a 5/8” ceiling thickness.
ACCESORIES
Catalog No. Description
GU10WHIP
GU10 Socket Whip
SMPLT4 4” Housing Locator
To order, specify catalog number.
DIMENSIONS
4 3/8” CEILING CUTOUT
4 11/16"
5 1/4"
5 9/16"
11 1/2"
PRODUCT CODES
Catalog No. Input Voltage Lamp Types
TC1RC W N
4” Incandescent Remodel Clamp Style
Non-IC Housing
120V
PAR20/PAR16 Medium Base, MR16/PAR16/ES16 GU10 Base
(See reverse for Trim/Lamp/Max. Wattage Ratings)
Housing and trim can be ordered together or separate, but will always ship separately.