Cut Sheet

FLEX 12
Flexible Low Voltage Trac System
WALL MOUNT FEEDS & OUTRIGGERS
TF45, TF529 and TF530
D5.1.4
Project:
Fixture Type:
Location:
Contact/Phone:
REV-6/09
DIMENSIONS
1 3/8"
2 1/2"
5"
5 3/8"
1 1/8"
5"
5 3/8"
1 1/8"
3"
PRODUCT SPECIFICATIONS
Catalog Number TF45SL
Description Wall Feed Canopy • Electrically feeds and/or
mechanically supports the trac perpendicular to the wall • Mounts
directly to wall over standard 4” outlet box • For spans over 6’,
one mechanical support is required for each additional 36” of
length • Silver finish.
Electrical Rated 25 amps at 12V (300VA) or 24V (600VA).
Labels UL listed, CSA certified • New York City Approved.
Product specifications subject to change without notice.
Catalog Number TF529SL
Description Electrical Feed Outrigger • Used to electrically feed
and mechanically support the trac in parallel to the wall
installations • Mounts directly to wall over standard 4” outlet box
• Silver finish.
Electrical Rated 25 amps at 12V (300VA) or 24V (600VA).
Labels UL listed, CSA certified • New York City Approved.
Product specifications subject to change without notice.
Catalog Number TF530SL
Description Mechanical Support Outrigger • Used to
mechanically support the trac in parallel to the wall installations
• Supplied with toggle bolts for use in drywall construction
• Installer may substitute wood screws or other fasteners as
required • One Mechanical Support Outrigger is required per 4’
trac run and for each additional 36” of trac length • Silver finish.
Labels UL listed, CSA certified • New York City Approved.
Product specifications subject to change without notice.