Cut Sheet

TRAC 12, TRAC 12/25, FLEX 12
Low Voltage Systems
12V REMOTE MOUNT
MAGNETIC TRANSFORMERS
TL575, TL549N , TL550N,
TL554N and TF5150
D3.1.3
Project:
Fixture Type:
Location:
Contact/Phone:
REV-8/11
PRODUCT CODES
Catalog Input
Number Finish Voltage Description
TL575-20-BL Black 120VAC 20W Magnetic 12V Transformer
TL575-20-277-BL Black 277VAC 20W Magnetic 12V Transformer
TL575-40-BL Black 120VAC 40W Magnetic 12V Transformer
TL575-40-277-BL Black 277VAC 40W Magnetic 12V Transformer
TL575-75-BL Black 120VAC 75W Magnetic 12V Transformer
TL575-75-277-BL Black 277VAC 75W Magnetic 12V Transformer
TL554N-BL Black 120VAC 150W Magnetic 12V Transformer
TL554N-277-BL Black 277VAC 150W Magnetic 12V Transformer
TL549N-BL Black 120VAC 240W Magnetic 12V Transformer
TL549N-277-BL Black 277VAC 240W Magnetic 12V Transformer
TL550N-BL Black 120VAC 480W Magnetic 12V Transformer
(Dual Circuit)
TL550N-277-BL Black 277VAC 480W Magnetic 12V Transformer
(Dual Circuit)
TF5150BL Black 120VAC 150W Magnetic 12V Transformer
TF5150BL-277 Black 277VAC 150W Magnetic 12V Transformer
L
W
D
OPTIONS
(Add as suffix to catalog number)
Catalog Number Description
-CP6 6ft. Cord & Plug (120VAC Only), factory installed
Ordering Example: TL554N-BL-CP6
TRANSFORMER DIMENSIONS
Catalog Number Length (L) Width (W) Depth (D)
TL575-XX-BL 10
3
/4”4
3
/8”4
1
/8”
TL575-XX-277-BL 10
3
/4”4
3
/8”4
1
/8”
TL554N-BL 10
3
/4”4
3
/8”4
1
/8”
TL554N-277-BL 10
3
/4”4
3
/8”4
1
/8”
TL549N-BL 10
3
/4”4
3
/8”4
1
/8”
TL549N-277-BL 10
3
/4”4
3
/8”4
1
/8”
TL550N-BL 11
3
/8”5
3
/8”5
1
/8”
TL550N-277-BL 11
3
/8”5
3
/8”5
1
/8”
TF5150BL 10
3
/4”4
3
/8”4
1
/8”
TF5150BL-277 10
3
/4”4
3
/8”4
1
/8”
PRODUCT SPECIFICATIONS
Description
TL575-20-BL: 12V-20VA Remote Magnetic Transformer • Rated
for 0.5-20 watts for incandescent or LED loads • 120VAC input.
TL575-20-277-BL: Same as above with 277VAC input.
TL575-40-BL: 12V-40VA Remote Magnetic Transformer • Rated
for 0.5-40 watts for incandescent or LED loads • 120VAC input.
TL575-40-277-BL: Same as above with 277VAC input.
TL575-75-BL: 12V-75VA Remote Magnetic Transformer • Rated
for 0.5-75 watts for incandescent or LED loads • 120VAC input.
TL575-75-277-BL: Same as above with 277VAC input.
TL554N-BL: 12V-150VA Remote Magnetic Transformer • Rated
for 50-150 watts for incandescent loads, 75-150 watts for LED
loads • 120VAC input.
TL554N-277-BL: Same as above with 277VAC input.
TL549N-BL: 12V-240VA Remote Magnetic Transformer • Rated
for 120-240 watts for incandescent or LED loads • 120VAC input.
TL549N-277-BL: Same as above with 277VAC input.
TL550N-BL: 12V-480VA Dual Circuit Remote Magnetic
Transformer • Contains two 240VA circuits, each rated for
120-240 watts for incandescent or LED loads • 120VAC input.
TL550N-277-BL: Same as above with 277VAC input.
TF5150BL: 12V-150VA Remote Magnetic Transformer • Rated for
50-150 watts for incandescent loads, 75-150 watts for LED loads
• 120VAC input • Similar to TL554N but with terminal block
wiring connections to facilitate installation.
TF5150BL-277: Same as above with 277VAC input.
Construction Potted core and coil • 13 volt boost tap • Thermally
protected primary • Manually resettable, fast-acting magnetic circuit
breaker on secondary • Primary and secondary circuits physically and
electrically isolated.
Circuit Breaker Resettable magnetic circuit breaker • Provides faster
short circuit protection than standard thermal circuit breakers
• Provides overload protection which is unaffected by ambient
operating conditions • Eliminates false overload failures due to
elevated ambient temperatures which can occur with thermal circuit
breakers • Enables transformer to be mounted in any position.
Dimming 120V installations only – consult factory for 277V dimming
applications • Incandescent loads can be dimmed with high quality
dimmers designed specifically for use with magnetic transformer • LED
loads may be dimmed using only dimmers that have been tested and
qualified by Juno for use with Juno LED fixtures including: Lutron Diva
DVLV-600P, Lutron Nova NLV-600, Lutron Ceana CNLV-600P, Lutron
Skylark SLV-600P – consult factory to confirm compatibility of other
dimmers prior to installation with Juno LED fixtures.
Installation Easy access front located wiring compartment • Wire
nut terminations for input and output circuits (except TF5150)
• Operate in accessible locations with ambient temperatures below
140˚ F.
Labels UL/CUL listed • New York City Approved.
Product specifications subject to change without notice.
DIMENSIONS