Cut Sheet

REV-2/09
G5.5.2
Project:
Fixture Type:
Location:
Contact/Phone:
8” SQUARE
TC HOUSING
INCANDESCENT LAMPS
TC6
DIMENSIONS
8 5/8” SQ. CEILING CUTOUT
PRODUCT CODES
Catalog Number Input Voltage Lamp Rating (max.)
TC6 120V 100W A19
PRODUCT DESCRIPTION
TC Housing designed for use in non-insulated areas • If installed
where insulation is present, the insulation must be pulled back 3”
from all sides of the TC housing.
PRODUCT SPECIFICATIONS
Lamp One 100W A19 lamp.
Socket Medium base porcelain with nickel-plated copper screw
shell.
Trims Trim selection shown on reverse.
Labels UL listed for through-branch wiring, damp locations and IP
• Product thermally protected against improper use of insulation
• Union made • UL Listed/CSA certified.
Testing All reports are based on published industry procedures;
field performance may differ from laboratory performance.
Product specifications subject to change without notice.
INSTALLATION
Real Nail 3 Bar Hangers Telescoping, patent-pending Real Nail 3
system permits quick placement of housing anywhere within 24”
O.C. joists or suspended ceilings • Integral T-bar notch and clip
secures housing in suspended ceiling grid – no accessory clips
required • 24” expansion stop allows quick placement of fixture
in standard grid spacing • Bars scored in two locations for fast,
clean breaking, allowing housing installation in tight applications
• Bars captive to mounting frame • Edge-mounted for extra
strength • Captive bugle-headed ring shank nail for quick one-step
installation and easy removal with claw hammer for fixture
relocation • Quick-Loc slot and oversized locking set screw lock
fixture in position • Bar hanger foot contoured to align to bottom
of construction joist • Alternate mounting holes included.
Junction Box Pre-wired junction box provided with (5)
1
⁄2” and
(1)
3
⁄4” knockouts, (4) Romex connectors and ground wire, UL
listed/CSA certified for through-branch wiring, maximum 8 No.
12 AWG 90˚ C branch circuit conductors (4 in, 4 out) • Junction
box provided with removable access plates • Knockouts equipped
with pryout slots.
Mounting Frame 22-gauge die-formed galvanized steel
mounting frame • 13
1
⁄2” L x 9
5
⁄8” W, (excluding bar hangers)
• Rough-in section (junction box, mounting frame, housing and
bar hangers) fully assembled for ease of installation.
Housing TC housing, 22-gauge white painted steel • Housing is
vertically adjustable to accommodate up to a 1” ceiling thickness.