Cut Sheet

Electrical End Feeds
R21WH, R21BL,
R21SL
End Feed Connector and
Outlet Box Cover. For outlet
box feed. Includes: outlet
box cover, fixture strap and
ground screw.
R38WH, R38BL,
R38SL
Live End Feed Connector. Feed
trac from above with flexible
conduit, BX, etc., or end feed
in pendant systems. Accepts
standard
1
/2” connector.
Trac Joiners
R34WH, R34BL,
R34SL
Conduit Feed. For surface
wiring. Use standard
1
/2”
connector.
R36WH, R36BL,
R36SL
T-Bar End Feed. Wiring com-
partment contains standard
1
/2” KO’s. Feeds surface
trac from above, when T-bar
is directly above trac.
R20WH, R20BL,
R20SL
Accordion Adjustable Joiner.
Can flex to 90° angle to left,
right, up or down. Joins two
trac sections.
R23WH, R23BL,
R23SL
Miniature Straight Connector.
Joins two trac sections end to
end.
R24WH, R24BL,
R24SL
Adjustable Connector. Joins
two trac sections to make a
90° angle or straight run.
Straight and right angle
covers supplied. For outlet
box feed, No. T27 cover
plate required.
R25WH, R25BL,
R25SL
“T” Connector. Joins three
trac sections. For outlet box
feed, No. T27 cover plate
required.
R37F
15/16” T-bar Attachment Clip.
To attach to inverted tee ceilings
using flush tiles. Use two for 2’ or
4’ trac and three for 6’ or 8’ trac.
R37D
Same as above with spacer for
ceilings using drop tiles.
R37-9-16
9/16” T-bar Attachment Clip.
To attach Trac-Lites trac to inverted
tee ceilings using flush or drop
tiles. Use two for 2’ or 4’ trac and
three for 6’ or 8’ trac.
T93WH, T93BL,
T93SL
Wireway Cover for Pendant
Stem Kits T90 and T91.
Conceals electrical feed wires
from stem to connector. One
cover required for each trac feed.
T90-12, T90-18,
T90-24, T90-36,
T90-48
T-Bar Pendant Stem Kit (12”,
18”, 24”, 36”, 48”) - Use
two for 2’, 4’, 6’ of trac or
three for 8’ of trac. For electri-
cal feed, order T93 wireway
cover. WH, BL, SL
T91-12, T91-18,
T91-24, T91-36,
T91-48
Rigid Ceiling Pendant Stem Kit
(12”, 18”, 24”, 36”, 48”) -
Use two for 2’, 4’, 6’ of trac or
three for 8’ of trac. For electri-
cal feed, order T93 wireway
cover. WH, BL, SL
R22WH, R22BL,
R22SL
Cord and Plug Connector.
Comes with 15’ two-wire
white cord. Includes surface
wire retainers and in-line
switch. Max cap. 7 amps.
R122WH, R122BL,
R122SL
Same as above but with
matching color 3-wire
grounded cord and plug. No
switch.
T27WH, T27BL,
T27SL
Outlet Box Cover. Use with
Nos. R24/R25 for outlet
box electrical feed. Includes:
nipple, locknut and ground
screw.
R29WH, R29BL,
R29SL
Floating Electrical Feed.
Permits mounting any point
of trac under outlet box.
Includes floating connector,
outlet box cover plus extra
trac dead end.
T94WH, T94BL,
T94SL
Sloped Ceiling Adapter. Allows
T90 or T91 pendant to
hang straight down from sloped
ceilings. Can be used to feed
electrical wires to Trac at up to
60˚ angle.
T56WH, T56BL,
T56SL
Solid Rod Pendant Mounting Kit.
Attaches solid 5/16” threaded
rod to Trac. Includes: plastic cap,
mounting bracket and hardware.
Rod not supplied.
TRAC-LITES
One Circuit Trac System
TRAC SECTIONS, JOINERS & FEEDS
R2, R4, R6, and R8
Pendant Stems
Accessories
T96WH, T96BL,
T96SL
Pendant Stem Threaded
Coupling. Enables multiple
pendant stems to be joined
for higher ceiling applications.
R49WH, R49BL,
R49SL
Trac Continuation Kit. Permits
trac to continue a run around
obstructions. Includes one left
and one right R34 Conduit
Feed. Fits standard 1/2”
conduit.
D2.1.0
1300 S. Wolf Road • Des Plaines, IL 60018 • Phone [phone] • Fax [phone]
220 Chrysler Drive • Brampton, Ontario • Canada L6S 6B6 • Phone [phone] • Fax [phone]
Visit us at www.junolightinggroup.com
Printed in U.S.A. ©2012 Juno Lighting, LLC.
T31WH, T31BL, T31SL
Pendant Adapter. Adapts swag or
chain-hung fixture to trac. Supports
up to 25 lbs. Not UL Listed.
T32WH, T32BL, T32SL
Plant or Utility Hook. Supports up to
25 lbs. Not UL Listed.
T33WH, T33BL, T33SL
Outlet Adapter. Provides electrical
receptacle. Not UL Listed.
‡ R24 and R25 may not be used as feed connectors
in Canada due to special grounding requirements.
‡
‡
Product specifications subject to change without
notice.