Cut Sheet

DIMENSIONS
PRODUCT CODES
Catalog Number Description Actual Length Finish
R2WH 2' Trac Section 19
7
⁄8” White
R2BL 2’ Trac Section 19
7
⁄8” Black
R2SL 2’ Trac Section 19
7
⁄8” Silver
R2NA 2’ Trac Section 19
7
⁄8” Natural
R4WH 4’ Trac Section 43
7
⁄8” White
R4BL 4’ Trac Section 43
7
⁄8” Black
R4SL 4’ Trac Section 43
7
⁄8” Silver
R4NA 4’ Trac Section 43
7
⁄8” Natural
R6WH 6’ Trac Section 67
7
⁄8” White
R6BL 6’ Trac Section 67
7
⁄8” Black
R6SL 6’ Trac Section 67
7
⁄8” Silver
R6NA 6’ Trac Section 67
7
⁄8” Natural
R8WH 8’ Trac Section 91
7
⁄8” White
R8BL 8’ Trac Section 91
7
⁄8” Black
R8SL 8’ Trac Section 91
7
⁄8” Silver
R8NA 8’ Trac Section 91
7
⁄8” Natural
TRAC-LITES
One Circuit Trac System
TRAC SECTIONS, JOINERS & FEEDS
R2, R4, R6, and R8
D2.1.0
Project:
Fixture Type:
Location:
Contact/Phone:
REV-6/12
PRODUCT DESCRIPTION
Reduced-profile, single-circuit trac sections for surface or pendant
mounting. Compatible with a full range of feed, connector and
mounting accessories, as listed on back of this page. Accepts all
Trac-Lites and Trac-Master trac fixtures.
PRODUCT SPECIFICATIONS
Construction Extruded aluminum with thermoplastic insulator
• Injection molded polycarbonate dead-end with set screw
• Standard lengths may be cut-to-length by installer.
Electrical Two 12 gauge solid copper conductors • Rated 20
amps at 120 volts • Aluminum channel used as system ground
• One-piece insulator insures consistent conductor spacing for
reliable electrical contact • Insulating bushings supplied at
mounting hole locations to prevent shorts to ground.
Labels UL/CUL listed.
PRODUCT INSTALLATION
Debossed polarity line provides visual cue to proper trac, trac
connector and fixture alignment • Supplied with toggle bolts for
surface mounting • Insulator stays same length as extrusion to
simplify field-cutting of trac • Connectors and feeds simply push
into trac sections.
Product specifications subject to change without notice.