Cut Sheet

ManualsBrandsJuno Lighting ManualsIndoor Lighting - TraditionalOne Circuit Track, 8', Silver

DIMENSIONS

PRODUCT CODES

Catalog Number Description Actual Length Finish

T2WH 2' Trac Section 19

⁄8” White

T2BL 2’ Trac Section 19

⁄8” Black

T2SL 2’ Trac Section 19

⁄8” Silver

T2NA 2’ Trac Section 19

⁄8” Natural

T4WH 4’ Trac Section 43

⁄8” White

T4BL 4’ Trac Section 43

⁄8” Black

T4SL 4’ Trac Section 43

⁄8” Silver

T4NA 4’ Trac Section 43

⁄8” Natural

T6WH 6’ Trac Section 67

⁄8” White

T6BL 6’ Trac Section 67

⁄8” Black

T6SL 6’ Trac Section 67

⁄8” Silver

T6NA 6’ Trac Section 67

⁄8” Natural

T8WH 8’ Trac Section 91

⁄8” White

T8BL 8’ Trac Section 91

⁄8” Black

T8SL 8’ Trac Section 91

⁄8” Silver

T8NA 8’ Trac Section 91

⁄8” Natural

T12WH 12’ Trac Section 139

⁄8” White

T12BL 12’ Trac Section 139

⁄8” Black

T12SL 12’ Trac Section 139

⁄8” Silver

T12NA 12’ Trac Section 139

⁄8” Natural

TRAC-MASTER

One Circuit Trac System

TRAC SECTIONS, JOINERS & FEEDS

T2, T4, T6, T8 and T12

D1.1.0

Project:

Fixture Type:

Location:

Contact/Phone:

REV-6/09

PRODUCT DESCRIPTION

Low-Profile, single-circuit trac sections for surface or pendant

mounting. I-beam cross section provides added strength and

rigidity in pendant suspended applications. Compatible with a full

range of feed, connector and mounting accessories, as listed on

back of this page, to complete virtually any installation

requirement. Accepts all Trac-Master and Trac-Lites trac fixtures.

PRODUCT SPECIFICATIONS

Construction Extruded aluminum “I” beam channel • One-piece

thermoplastic insulator • Injection molded polycarbonate dead-

end with set screw • Standard lengths may be cut-to-length by

installer.

Electrical Two 12 gauge solid copper conductors • Rated 20

amps at 120 volts • Aluminum channel used as system ground

• One-piece insulator insures consistent conductor spacing for

reliable electrical contact • Insulating bushings supplied at

mounting hole locations to prevent shorts to ground.

Labels UL listed, CSA certified.

PRODUCT INSTALLATION

Debossed polarity line provides visual cue to proper trac, trac

connector and fixture alignment • Supplied with toggle bolts for

surface mounting • Integral raceway in top of channel

accommodates pendant mounting hardware and wire routing to

electrical feed • Insulator stays same length as extrusion to simplify

field-cutting of trac • Connectors and feeds simply push into trac

sections.

Product specifications subject to change without notice.

Summary of content (3 pages)

PAGE 1
D1.1.0 TRAC-MASTER® One Circuit Trac System Project: Fixture Type: TRAC SECTIONS , JOINERS & FEEDS Location: T2, T4, T6, T8 and T12 Contact/Phone: PRODUCT DESCRIPTION DIMENSIONS Low-Profile, single-circuit trac sections for surface or pendant mounting. I-beam cross section provides added strength and rigidity in pendant suspended applications. Compatible with a full range of feed, connector and mounting accessories, as listed on back of this page, to complete virtually any installation requirement.
PAGE 2
D1.1.0 TRAC-MASTER® One Circuit Trac System T2, T4, T6, T8 and T12 Electrical End Feeds Pendant Stems Trac Joiners T21WH, T21BL, T21SL End Feed Connector and Outlet Box Cover. For outlet box feed. Includes: outlet cover, fixture strap and ground screw. T20WH, T20BL, T20SL Accordion Adjustable Joiner. Can flex to 90° angle to left, right, up or down. Joins two trac sections. T29WH, T29BL, T29SL Floating Electrical Feed. Permits mounting any point of trac under outlet box.
PAGE 3
D1.1.0 TRAC-MASTER® One Circuit Trac System T2, T4, T6, T8 and T12 Accessories T37F 15/16” T-bar Attachment Clip. To attach trac to inverted tee ceilings using flush tiles. Use two for 2’ or 4’ trac and three for 6’, 8’ or 12’ trac. T37D Same as above with spacer for ceilings using drop tiles. T95WH, T95BL, T95SL Sloped Ceiling Adapter. Attaches to trac, permitting TracMaster or Vector Trac fixtures with standard size trac adapter to be hung vertically from sloped ceiling. 90˚ maximum adjustable.