Cut Sheet

D1.1.0
Electrical End Feeds
T21WH, T21BL,
T21SL
End Feed Connector and Outlet
Box Cover. For outlet box feed.
Includes: outlet cover, fixture
strap and ground screw.
T38WH, T38BL,
T38SL
Live End Feed Connector. Feed
trac from above with flexible
conduit, BX, etc., or end feed
in pendant systems. Accepts
standard
1
/2” connector.
Trac Joiners
T34WH, T34BL,
T34SL
Conduit Feed. For surface
wiring. Use standard
1
/2”
connector.
T36WH, T36BL,
T36SL
T-Bar End Feed. Wiring com-
partment contains standard
1
/2” KO’s. Feeds surface
trac from above, when T-bar
is directly above trac.
T20WH, T20BL,
T20SL
Accordion Adjustable Joiner. Can
flex to 90° angle to left, right, up
or down. Joins two trac sections.
T23WH, T23BL,
T23SL
Miniature Straight Connector.
Joins two trac sections end to end.
T93WH, T93BL,
T93SL
Wireway Cover for Pendant Stem
Kits T90 and T91. Conceals
electrical feed wires from stem to
connector. One cover required for
each trac feed.
T90-12, T90-18,
T90-24, T90-36,
T90-48
T-Bar Pendant Stem Kit (12”,
18”, 24”, 36”, 48”) - Use two
for 2’, 4’ of trac or three for
6’, 8’ or four for 12’ of trac.
For electrical feed, order T93
wireway cover. WH, BL, SL
T91-12, T91-18,
T91-24, T91-36,
T91-48
Rigid Ceiling Pendant Stem Kit
(12”, 18”, 24”, 36”, 48”)
- Use two for 2’, 4’ of trac or
three for 6’, 8’ or four for 12’
of trac. For electrical feed,
order T93 wireway cover.
WH, BL, SL
T22WH, T22BL,
T22SL
Cord and Plug Connector.
Comes with 15’ two-wire
white cord. Includes surface
wire retainers and in-line
switch. Max cap. 7 amps.
T122WH, T122BL,
T122SL
Same as above but with match-
ing color 3-wire grounded cord
and plug. No switch.
T49WH, T49BL,
T49SL
Trac Continuation Kit. Permits
trac to continue a run around
obstructions. Includes one left and
one right T34 Conduit Feed. Fits
standard 1/2” conduit.
T35WH, T35BL,
T35SL
T-Bar Adjustable Joiner Feed.
Joins two trac sections to make
90° angle or straight run. Wiring
compartment contains standard
1
/2” KO’s. Feeds from above
when T-bar is directly above trac.
T27WH, T27BL,
T27SL
Outlet Box Cover. Use with
T24/25/26 for outlet box
electrical feed. Includes: nipple,
locknut and ground screw.
T29WH, T29BL,
T29SL
Floating Electrical Feed. Permits
mounting any point of trac
under outlet box. Includes
floating connector, outlet box
cover plus extra trac dead end.
T94WH, T94BL,
T94SL
Sloped Ceiling Adapter. Allows
T90 or T91 pendant to
hang straight down from sloped
ceilings. Can be used to feed
electrical wires to Trac at up to
60˚ angle.
T92
Straight Structural Bridge. For
use with T24 Straight
Connector. Permits mounting
Pendant Stem Kits (T90, T91)
at center of Trac Joiner.
T92L-WH, T92L-BL,
T92L-SL
Corner Structural Bridge. For
use with T24 Right Angle
Connector. Permits mounting
Pendant Stem Kits (T90, T91) at
center of Right Angle Connector.
T56WH, T56BL,
T56SL
Solid Rod Pendant Mounting Kit.
Attaches solid 5/16” threaded
rod to Trac. Includes: plastic cap,
mounting bracket and hardware.
Rod not supplied.
TRAC-MASTER
®
One Circuit Trac System
T2, T4, T6, T8 and T12
Pendant Stems
Outrigger System
T47
Outrigger Bracket
(non-electrified).
For mounting trac out from
wall. Use two for 2’, 4’ or 6’
trac sections, three for 8’ trac
sections and four for 12’ trac
sections. Order trac and
connectors separately. For
portable electrical feed, use
T22 or T122 Cord & Plug
Connector. For permanent
wiring, use T38 end feed
connector.
T96WH, T96BL,
T96SL
Pendant Stem Threaded Coupling.
Enables multiple pendant stems
to be joined for higher ceiling
applications.
‡ T24, T25 and T26 may not be used as feed
connectors in Canada due to special grounding
requirements – T24F is approved for use as feed
connector in Canada (may also be used in U.S.).
T25WH, T25BL,
T25SL
“T” Connector. Joins three trac
sections. For outlet box feed,
T27 cover plate required.
‡
T26WH, T26BL,
T26SL
“X” Connector. Joins four trac sec-
tions at 90° angles. For outlet box
feed, T27 cover plate required.
‡
1300 S. Wolf Road • Des Plaines, IL 60018 • Phone [phone] • Fax [phone]
220 Chrysler Drive • Brampton, Ontario • Canada L6S 6B6 • Phone [phone] • Fax [phone]
Visit us at www.junolightinggroup.com Printed in U.S.A. ©2014 Juno Lighting, LLC.
T24WH, T24BL,
T24SL
Adjustable Connector. Joins two
trac sections to make a 90°
angle or straight run. Straight
and right angle covers supplied.
For outlet box feed, T27 cover
plate required.
T24FWH, T24FBL,
T24FSL
Same as T24 but with integral
ground connection. For outlet box
feed, T27 cover plate required.
‡
‡
Product specifications subject to change without notice.
T28WH, T28BL,
T28SL
Trac Dead End. For use with
field-cut trac sections.