Specification Sheet

One Lithonia Way • Conyers, GA 30012 • Phone [phone]-SERV (7378) • Visit us at www.acuitybrands.com
Printed in U.S.A. ©2017-2020 Acuity Brands Lighting, Inc. Rev. 12/16/20
2 of 6
Electrical Feeds
Examples: T21 BL, T34 RP WH
T21 T21 RP T29 T34 T34 RP
BL, SL, WH BL, SL, WH BL, SL, WH BL, SL, WH BL, SL, WH
End Feed Connector
and Outlet Box Cover
End Feed Connector
and Outlet Box Cover
Floating Electrical Feed Conduit End Feed Conduit End Feed
For outlet box feed. Includes: outlet box
cover, fixture strap and ground screw.
Same as T21 except designed for
use in opposite polarity orientation
compared to standard feed connectors.
Permits mounting any point of trac
under outlet box. Includes floating
connector, outlet box cover plus extra
trac dead end.
For surface wiring. Use standard 1/2”
connector.
Same as T34 except designed for use in
opposite polarity orientation compared to
standard feed connectors.
T36 T36 RP T38 T38 RP
BL, SL, WH BL, SL, WH BL, SL, WH BL, SL, WH
T-Bar End Feed T-Bar End Feed Live End Feed Connector Live End Feed Connector
Wiring compartment contains standard
1/2” KO’s. Feeds surface trac from
above, when T-bar is directly above trac.
Same as T36 except designed for
use in opposite polarity orientation
compared to standard feed connectors.
Feed trac from above with flexible
conduit, BX, etc., or end feed in
pendant systems. Accepts standard
1/2” connector.
Same as T38 except designed for
use in opposite polarity orientation
compared to standard feed connectors.
T22 T122
BL, SL, WH BL, SL, WH
Cord and Plug End Feed Cord and Plug End Feed
Comes with 15’ two-wire white cord.
Includes surface wire retainers and
in-line switch. Max cap. 7 amps. Not
UL Listed.
Same as T122 but with matching
color 3-wire grounded cord and plug. No
switch. Not UL Listed.
D1.1.0
TRAC-MASTER
®
One Circuit Trac System
TRAC SECTION, JOINERS & FEEDS
T Series
Outrigger System
T47
BL, WH
Outrigger Bracket (non-electrified)
For mounting trac out from wall. Use two for 2’,
4’ or 6’ trac sections, three for 8’ trac sections and
four for 12’ trac sections. Order trac and connectors
separately. For portable electrical feed, use T22 or
T122 Cord & Plug Connector. For permanent wiring,
use T38 end feed connector.