Cut Sheet

One Lithonia Way • Conyers, GA 30012 • Phone [phone]-SERV (7378) • [e-mail] • Visit us at www.acuitybrands.com
Printed in U.S.A. © 2022 Acuity Brands Lighting, Inc. Rev. 05/10/22
3 of 3
Quick Connect LED Downlight Series
6" Quick Connect LED Housing for use with LED Retrofit Trims
Remodel
Light Commercial & Residential
QC6R
Specifications/Electrical Data
Housing
Designed for use in IC (insulated ceiling) or non-IC construction •Aluminum
housing sealed for Air-Loc
®
compliance, with optional pre-installed Air-Loc
®
gasket applied to housing when G (gasket) option is ordered • Double stack
adjustable feature enables remodel spring to accommodate up to 1¾" ceiling
thickness
Electrical Connections
Features non-screw base 120V plug-in orange connector • Compatible with
retrofit LED trim modules
Junction Box
Pre-wired junction box, UL and cUL listed for throughbranch wiring maximum
4 No. 12 AWG 90˚ C branch circuit conductors (2 in, 2 out) • Junction box
provided with removable access plate, (5) ½" knockouts, (4) Non-metallic
sheathed cable connectors and ground wire • Knockouts equipped with pryout
slots • Optional push-in electrical connectors for fast, secure wiring when
ordering W (push in connector) option
Installation
For remodel application where back side of ceiling is not accessible • Installs
through an opening in the ceiling from below • Secured in place by factory
installed remodel springs
Certifications
Can be used to comply with 2019 Title 24 Part 6 JA8 high efficacy LED light
source requirements • UL listed for U.S. and Canada through-branch wiring,
damp locations • When used with E, RLD, J6RL, 6SL and specific models of Juno
AI series, suitable for wet locations • UL and cUL
Testing: All reports are based on published industry procedures; field
performance may differ from laboratory performance.
WARRANTY — 1-year limited warranty. This is the only warranty provided
and no other statements in this specification sheet create any warranty of
any kind. All other express and implied warranties are disclaimed. Complete
warranty terms located at: www.acuitybrands.com/support/warranty/terms-
and-conditions
Note: Actual performance may differ as a result of end-user environment and
application.
All values are design or typical values, measured under laboratory conditions
at 25 °C.
Specifications subject to change without notice.