Cut Sheet

REV-3/11
G5.6.7
Project:
Fixture Type:
Location:
Contact/Phone:
MINI LED STEP LIGHT
OUTDOOR/WET LOCATION
LED
LMSW
PRODUCT DESCRIPTION
The LMSW Mini LED step light is designed for installation in
outdoor or indoor wall mount applications using standard junction
boxes (not supplied) • IC rated for direct contact with insulating
materials • Four distinct optics conceal LEDs and provide unique
light distribution patterns • Modular design allows fixture to be
mounted in horizontal or vertical orientation • Ideal for residential
or commercial applications • Designed to provide 50,000 hours
of life • 5 year warranty on LED components.
ENVIRONMENTALLY FRIENDLY, ENERGY
EFFICIENT
• No harmful ultraviolet or infrared wavelengths
• No lead or mercury
PRODUCT SPECIFICATIONS
LED Light Engine Utilizes two 1-watt high lumen LEDs binned to
Energy Star standards • 3000K or 4100K color temperatures are
available • Mounted directly to aluminum heat sink for superior
thermal management.
Optics Available in hood, cutoff, louver, and marker optics to
conceal LEDs and provide four unique light distribution patterns
• Fixture provided in vertical orientation from factory.
Faceplates May be mounted in vertical (as provided from factory)
or horizontal orientation • Fastens using 0.05 allen wrench
provided with fixtures • Available in textured silver, bronze, black
and white corrosion resistant paint.
LED Driver Accommodates an input voltage of 120 VAC at 60Hz
• Power factor > 0.9 at 120V input • Driver is dimmable with the
use of Juno qualified 120V electronic low voltage dimmers.
Mounting Designed to mount directly in standard J-Boxes:
2” x 4” (2 1⁄8” minimum depth) or 4” x 4” (1 1⁄2” minimum
depth) fitted with a single-gang plaster ring 5/8” minimum depth
• Modular design allows fixture to be mounted in horizontal or
vertical orientation • J-Boxes and plaster ring are not provided
• Gasketed to seal against intrusion of water and other
contaminants in wet locations.
Life Rated for 50,000 hours at 70% Lumen Maintenance.
Labels UL listed for wet locations and through-branch wiring,
maximum 4 No. 12 AWG 75° C through branch circuit
conductors for 2 x 4 junction box or maximum 8 No. 12 AWG
75° C through branch circuit conductors for 4 x 4 junction box
• UL and cUL Listed, RoHS compliant • IP65 rated.
Testing All reports are based on published industry procedures;
field performance may differ from laboratory performance.
Product specifications subject to change without notice.
MARKER, LOUVER, CUTOFF
IP65
DIMMER COMPATIBILITY
• Requires 120V AC electronic low voltage wall box dimmer
• Electronic low voltage dimmers require a neutral wire in the
wall box • 100% to 20% or better dimming range depending
on dimmer model with one fixture load minimum to maximum
rated load for dimmer.
Juno qualified dimmers include:
Lutron
®
Model Numbers:
Nova T
®
NTELV Series
Skylark
®
SELV Series
Diva
®
DVELV Series
Maestro
®
MAELV Series
Faedra
®
FAELV Series
Spacer System
®
SPSELV Series
Leviton
®
Model Numbers:
Illumatech™ IPE04 Series
(dimmer has manual trim
adjustment for low end of
dimming range to achieve
5% dimming)
ELECTRICAL DATA
Input Voltage 120V
Input Power 2.6W
Input Current 0.03A
Frequency 60Hz
Minimum starting temp -20°C (-4°F)
DIMENSIONS
Note: Vertical
orientation shown.
All fixtures can be
mounted in vertical
or horizontal
orientation.
HOOD
CUTOFF
(VERTICAL ORIENTATION)
HOOD
(HORIZONTAL ORIENTATION)
LOUVER
(HORIZONTAL ORIENTATION)
MARKER
(VERTICAL ORIENTATION)