Installation Sheet

1300 S Wolf Road · Des Plaines, IL 60018 · Phone 1-800-705-SERV (7378)· Visit us at www.acuitybrands.com/indy

2 of 4

Technical Services Phone 1-800-705-SERV (7378)

Step 11: With cable locked in place to the desired length, cut

the excess cable and slide crimp sleeve onto cable and

Step 12: Re-attach safety cable to reveal as shown.

Step 13: With safety cable attached to reveal, make wiring

connections. To ensure proper wiring, see wiring diagrams

on pages 3 & 4.

Step 14: Attach cylinder housing to reveal by aligning screws

to slots in reveal, pushing housing up and twisting slightly.

Tighten screws to secure in place.

Step 15: Optional: Cable and power cord may be banded

together using wire ties (included).

Step 16: (A) Locate trim. (B) Locate gasket fixed to cylinder

housing (already installed).

Step 17: Insert trim into the housing and on the provided

gasket. Make sure the trim flange seats firmly against hous-

ing.

Installation is complete.

16A

16B

*Hyperbolic Trim Patented*

Patent No. US10670227B2