Specification Sheet

Project:
Fixture Type:
Location:
Contact/Phone:
1300 S. Wolf Road • Des Plaines, IL 60018 • Phone [phone] • Fax [phone] • Visit us at www.acuitybrands.com/juno-recessed
Printed in U.S.A. ©2017 Acuity Brands Lighting, Inc. Rev. 03/01/17
1 of 2
PRODUCT DESCRIPTION
IC Air-Loc
®
Housing • Energy efficient, sealed housing • Can be
completely covered with insulation • When used with Air-Loc Gasket
accessory or pre-installed gasket on mounting frame, stops infiltration and
exfiltration of air, reducing heating and cooling costs • Trims shown with
Air-Loc symbol do not require a gasket.
PRODUCT SPECIFICATIONS
Lamp Lamp ratings based on trim selected – see page 2.
Socket Medium base porcelain with nickel-plated copper screw shell
• Floating socket with spring attaches to trim for installation.
Trims Trim selection shown on page 2.
Labels UL listed for through-branch wiring, damp locations and IP
• Product thermally protected against improper use of lamps • UL Listed/
CSA certified • Trims 239 and 241 are wet location approved for
covered ceiling applications • Trims 28, 29 are wet location approved
for covered ceilings, must be used with outdoor rated lamps.
Testing All reports are based on published industry procedures;
field performance may differ from laboratory performance.
Specifications subject to change without notice.
INSTALLATION
Real Nail
®
3 Bar Hangers Telescoping, Patented (US Patent D552,969)
Real Nail 3 system permits quick placement of housing anywhere within
24” O.C. joists or suspended ceilings • Integral T-bar notch and clip
secures housing in suspended ceiling grid – no accessory clips required
• 24” expansion stop allows quick placement of fixture in standard grid
spacing • Bars scored in two locations for fast, clean breaking, allowing
housing installation in tight applications • Bars captive to mounting frame
• Edge-mounted for extra strength • Captive bugle-headed ring shank
nail for quick one-step installation and easy removal with claw hammer
for fixture relocation • Quick-Loc slot (location identified on the
mounting frame) and oversized locking set screw lock fixture in position
• Bar hanger foot contoured to align to bottom of construction joist
• Alternate mounting holes included.
Junction Box Pre-wired junction box provided with (5)
1
⁄2” and (1)
3
⁄4”
knockouts, (4) Non-metallic sheathed cable connectors and ground wire,
U.L. listed/CSA certified for through-branch wiring, maximum 8 No.
12 AWG 90˚ C branch circuit conductors (4 in, 4 out) • Junction box
provided with removable access plates • Knockouts equipped with
pryout slots • W options are supplied with push-in electrical connectors
for fast installation .
Mounting Frame 22-gauge die-formed galvanized steel mounting
frame • Rough-in section (junction box, mounting frame, housing and bar
hangers) fully assembled for ease of installation • Sight lines embossed
on mounting frame to allow for easy viewing when aligning fixtures
• Pre-installed Air-Loc gasket for G options .
Housing IC housing, .032” aluminum sealed for Air-Loc Compliance
• Housing is vertically adjustable to accommodate up to a 1” ceiling
thickness.
G1.2.3
6” ECONOMY UNIVERSAL
IC HOUSING
INCANDESCENT LAMPS
IC23 SERIES
6 7/8” CEILING CUTOUT
DIMENSIONS
7 1/8"
13 1/2"
Will expand
to 25"
(Reduces to 8 1/2"
with breakaway
feature)
7 1/2"
9 1/2"
13 1/8"
Catalog Number Description
ALG6
Air-Loc Gasket
To order, specify catalog number.
Accessories
Catalog Number Input Voltage Lamp Rating
IC23
6" Incandescent No Plate New Construction IC Housing 120V A19/BR30/BR40/PAR16/PAR20/PAR30/PAR30L/PAR38/R20 (See page 2 for max. trim rating)
IC23 G
6" Incandescent No Plate New Construction IC Housing with pre-installed Air-Loc gasket 120V A19/BR30/BR40/PAR16/PAR20/PAR30/PAR30L/PAR38/R20 (See page 2 for max. trim rating)
IC23 W
6" Incandescent No Plate New Construction IC Housing with push-in electrical connectors for fast, secure installation 120V A19/BR30/BR40/PAR16/PAR20/PAR30/PAR30L/PAR38/R20 (See page 2 for max. trim rating)
IC23 W G
6" Incandescent No Plate New Construction IC Housing with push-in electrical connectors and pre-installed Air-Loc gasket 120V A19/BR30/BR40/PAR16/PAR20/PAR30/PAR30L/PAR38/R20 (See page 2 for max. trim rating)
PRODUCT CODES
Housing and trim can be ordered together or separate, but will always ship separately.